Table of Contents
Advertisement
JlEMORY INITIALIZATION
PROCEDURE for the DP-85 CHASSIS
HDTV POWER
ON
PROCEDURES
(Requires
Remote
Control):
5.
Turn off TV.
Unplug power cord (or turn off
power strip).
Wait approximately 30 seconds.
Plug in power cord (or turn on
power strip).
Wait for front panel LED to flash
twice.
Wait 10 seconds longer.
Turn on TV.
Press front panel [TV/SAT] but-
ton once for Satellite program-
ming.
Enter the HDTV channel number,
then press the [Select] or [Menu]
button.
IMPORTANT:
Do not perform the normal Memory
Initialization
as in the past. Service
Adjustment Data will be erased.
All Service Adjustment Data will be
lost
A
10. Wait up to TWO minutes, depend-
ing on antenna strength, for chan-
nel programming to download.
11. The HDTV loop tape program
should appear on the screen.
PAGE 01-42
Advertisement
Table of Contents
