Table of Contents
Advertisement
BASIC TV OPERATION
Changing Between DIRECTV and TV Mode
When
you change
channels
by entering
numbers
with the remote
control,
you
tune to programming
that can come from one of three
different
sources:
the
DIRECTV
satellite
(if you have DIRECTV
service),
a terrestrial
off-air
antenna,
or
cable TV. You tune to one of these sources
by pressing
the DTV/SAT
button
on
the remote
control;
then
you can enter the channel
numbers
The diagrams
below
show how your
remote
control
communicates
with the three sources.
In
SAT
mode,
you tune to channels
that come from
DIRECTV
(if you
subscribe
to DIRECTV@
programming).
Enter channel
numbers
that are three
or four digits
long. Then press SELECT
to tune.
In
TV
mode,
you tune to channels
that
carry the terrestrial
off-air
or cable TV
signal.
l
To tune to a digital
channel,
enter
channel
numbers
that are one,
two, or three
digits
long. If
necessary,
press the right arrow
and enter a subchannel
number.
These numbers
appear
in the box
to the right of the primary
channel
number.
Press SELECT to tune.
l
To tune to an analog
channel,
enter channel
numbers
that are up
to three digits
long.
Press SELECT
to tune.
19
Advertisement
Table of Contents
