Server Network Settings
MENU m →
→
Network
Server Network Settings
Connect to Server
To run
Player
connect to a network.
Server Address
SSL
Port
/
/
•
― If the
SSL
option is enabled, the server is configured to use https and data transfer is encrypted.
― Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to
the server using port number 7001, check with your server administrator to find the correct port
number and then change the port number.)
Server Access
Select a method to connect the server network.
Allow
Deny
•
/
FTP Mode
Specify the FTP operating mode.
Active
/
Passive
•
→ ENTER E
Device Name
MENU m →
→
→ ENTER E
Network
Device Name
Select or enter a device name.
This name can be shown on network remote controls over the network.
User Input
/
[Signage]Display 1
~
6
•
90