1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Monitor
  5. CQ-VA7005W
  6. Operating instructions manual

Panasonic CQ-VA7005W Operating Instructions Manual

In-dash 7" widescreen color lcd monitor/dvd receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
7-‰˛ÈÏÓ‚˚È ‡‚ÚÓÏÓ·ËθÌ˚È ¯ËÓÍÓ˝Í‡ÌÌ˚È ˆ‚ÂÚÌÓÈ Üä-ÏÓÌËÚÓ/DVD-ÂÒË‚Â
TILT
CLOSE
ASPECT
OPEN / CLOSE
ASP
CQ-VD7005W
TILT
O / C
P·MODE
CQ-VD7001U
VOL
PWR
MUTE
SRC
MENU
NAVI
In-dash 7"Widescreen Color LCD Monitor/DVD Receiver
인대쉬 7" 와이드스크린 컬러 LCD 모니터/DVD 리시버
PWR
MUTE
SRC
VOL
ENTER / BAND
ENT
TOP MENU
TEXT
RET
RETURN
DVD MENU
CAR AV
ENTER
CQ-VD7005W
Model:
TEXT

Advertisement

Table of Contents
loading

Related Manuals for Panasonic CQ-VA7005W

Summary of Contents for Panasonic CQ-VA7005W

  • Page 1 7-‰˛ÈÏÓ‚˚È ‡‚ÚÓÏÓ·ËθÌ˚È ¯ËÓÍÓ˝Í‡ÌÌ˚È ˆ‚ÂÚÌÓÈ Üä-ÏÓÌËÚÓ/DVD-ÂÒË‚Â TILT CLOSE ASPECT OPEN / CLOSE CQ-VD7005W TILT O / C TEXT P·MODE CQ-VD7001U RETURN ENTER MUTE MENU NAVI In-dash 7"Widescreen Color LCD Monitor/DVD Receiver 인대쉬 7" 와이드스크린 컬러 LCD 모니터/DVD 리시버 CQ-VD7005W Model: MUTE ENTER / BAND TOP MENU DVD MENU...

  • Page 2: Safety Information

    They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual.
  • Page 3 Installation of this unit requires special skills and experi- ence. For maximum safety, have it installed by your dealer. Panasonic is not liable for any problems resulting from your own installation of the unit. Follow the instructions to install and wire the prod- uct.
  • Page 4 Safety Information Caution THIS PRODUCT IS A CLASS I LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR BY YOUR- SELF.

  • Page 5: Notes On Use

    Notes on Use Liquid Crystal Panel ¡ Do not cause impact to the liquid crystal panel. ¡ Usage temperature range: 0 °C to 40 °C When the temperature is very cold or very hot, the image may not appear clearly or may move slowly. Also, movement of the image may seem to be out of synchronization or the image quality may decline in such environments.

  • Page 6: Features

    Features Panasonic welcomes you to our constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company.

  • Page 7: Table Of Contents

    Contents English 한국어 êÛÒÒÍËÈ ¢ Safety Information ... 2 ¢ Notes on Use ... 5 ¢ Before Reading These Instructions ... 5 ¢ Components ... 5 ¢ Features ... 6 ¢ Preparation... 8 First time power on, other settings, remote control unit, symbols used in this manual ¢...

  • Page 8: Preparation

    ¡Improper use of a battery may cause overheating, an explosion or ignition, resulting in injury or a fire. Note: ¡Battery Information: Battery Type: Panasonic lithium battery (CR2025) Battery Life: Approximately 6 months under normal use (at room temperature) Remote Control Unit...

  • Page 9: Symbols Used In This Manual

    Symbols used in this manual Pictographs You can perform some operations of this unit in one or more methods with the touch panel or remote control. This book explains such operations in tabular form as fol- lows. Refer to the following for the pictographs located in the upper part of each table.

  • Page 10: Name Of Controls And Functions

    [ASP], [MENU], [u], [OPEN], [TILT] are available only on the main unit. ¡ : This book refers to connections to the Panasonic car navigation system that will come onto the market in the future. Descriptions regarding the car navigation system are boxed with a dotted line.

  • Page 11: Remote Control

    Remote Control Aim the remote control at the remote control sensor of the main unit and operate it. q [SRC] (PWR) (SOURCE/POWER) [ ] [ ] [ B ] [ s ] [ d ] [RET] (RETURN) Note: [ENT], [RET], [ ], [ ], [ B ], ¡...

  • Page 12: Touch Panel Operation Overview

    Touch Panel Operation Overview Notes on the Touch Panel Before operation ¡Clean the surface of the touch panel. Operation ¡Use only your fingers to operate the touch panel. ¡Do not press the panel forcefully. ¡Do not scratch the panel with fingernails or any hard objects.
  • Page 13 Switching the Display Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are connected. Touching allows users to switch between screens as follows. How to Call up Operation Screen Source Radio page 24) Disc Player (DVD/VCD CD/MP3/WMA) page 18)

  • Page 14: General

    General [VOL] Preparation: Turn your car’s ignition key to the ACC or ON position. General Operations Operations Power ON : Power OFF : Display Open/Close Source selection …… Touch/Press and hold for more than 2 seconds CQ-VD7005W [TILT] ASPECT P·MODE CQ-VD7005W MUTE MUTE...
  • Page 15 [SRC] (PWR: power) [MUTE] MUTE MUTE MUTE [ + ] [ – ] (VOL) ENTER / BAND [] ] [[ ] TOP MENU RETURN DVD MENU CAR AV General Operations (continued) Operations Volume Note: ¡The sound level for each source is stored in memory.

  • Page 16: Before Disc Playback

    Before Disc Playback Discs that can be Played Back Disc Type DISC (Video CD) Mark/logo Disc Size Video NTSC/PAL Format LPCM, MPEG1, Audio LPCM, MPEG2, Format MPEG1 dts, Dolby Digital Region (ALL) CQ-VD7005W2 * CQ-VD7005W3 * CQ-VD7005W5 Note: ¡About CD-Rs/RWs and DVD–Rs/RWs, refer to “Notes on CD-Rs/RWs and DVD–Rs/RWs”.
  • Page 17 Printed side Caution ¡When the disc is inserted or ejected, to prevent disc scratches never exert any downward force on the disc. Disc Insert DVD VCD VCD CD CD MP3 MP3 WMA ¡The mode that supports the disc is selected, and play- back starts.

  • Page 18: Disc Player

    Disc Player Disc Mode ( DVD ) Selection q Touch “Source Button”. Press [SRC] to change to the desired mode. To switch Operation Screen ON, touch the center of touch panel or press [ENTER]. (Only for Video Mode) Video Mode mode display Source Button Playing time...

  • Page 19: Basic Operations

    Basic Operations Compatible Compatible Compatible Operations Discs Discs Discs Track/file Selection Compatible Discs Disques compatibles Fast Forward/ Fast Reverse Compatible Discs Folder Selection Compatible Discs Title/text Scroll CD CD CD Stop Compatible Discs Pause Discos compatibles Slow Playback Compatible Discs Repeat Play Repeat Play within the Current Folder...
  • Page 20 Disc Player To switch Operation Screen ON, touch the center of touch panel or press [ENTER]. Chapter/title Selection Compatible Compatible Compatible Operations Showing menu and selecting an item Note on VCD: For VCD, touch/press / [RETURN] instead / [DVD MENU]. Starting Playback from a specific chapter/title...
  • Page 21 mode display Repeat play Chapter/title selection Fast forward/fast reverse Play/stop/pause Useful Function Compatible Compatible Compatible Operations Discs Discs Discs Subtitle Language Compatible Discs Disques Audio Language compatibles Compatible Angle Discs Compatible Discs Stereo & Monaural Compatible Discs Discos compatibles Compatible Note: Discs ¡If no operation is performed for 10 seconds or...

  • Page 22: Notes On Mp3/Wma

    Notes on MP3/WMA What is MP3/WMA? MP3* (MPEG Audio Layer-3) and WMA (Windows Media Audio) are the compression formats of digital audio. The former is developed by MPEG (Motion Picture Experts Group), and the latter is developed by Microsoft Corporation. Using these compression formats, you can record the contents of about 10 music CDs on a single CD (This figure refers to data recorded on a 650 MB CD-R or CD-RW at a fixed bit rate of...
  • Page 23 Recording MP3/WMA files on a CD-media Recording MP3/WMA files on a CD-media ¡ You are recommended to minimize the chances of making a disc that contains both CD-DA files and MP3/WMA files. ¡ If CD-DA files are on the same disc as MP3 or WMA files, the songs may not play in the intended order, or some songs may not play at all.

  • Page 24: Radio

    Radio Radio Mode Selection q Touch “Source Button”. Press [SRC] to change to the desired mode. To switch Operation Screen ON, touch Appears when is selected. MENU RADIO FM SETUP Tuning Operations Band Selection List Selection Refer to the next page. Station Selection Seek Tuning...

  • Page 25: Preset Memory

    Preset Memory Select a band and frequency. Manual Preset Memory Up to 6 stations can be preset in each band. ¡ Touch/press and hold for more than 2 seconds. ¡ The frequency blinks once, and a receiving station is saved in the memory. New stations overwrite existing saved stations.

  • Page 26: Av1/Av2

    INPUT is not skipped even if ¡If no operation is performed for 10 seconds or touched, the operation buttons disappear. ¡AV terminal is not used for the Panasonic car navigation system (available in the future). Refer to for setting. NAVI SETUP...
  • Page 27 CQ-VD7005W...

  • Page 28: Settings

    Settings Preparation: To display menu in Chinese, Execute USER User DISPLAY UNIT Display adjustment CLOCK Clock setting ID-CODE ID Code Setting MEMORY CLEAR Memory clearance OTHER Other settings SCREEN Screen DIMMER Adjusting the brightness PICTURE Display appearance AUDIO Audio SOUND SETUP Sound setting GRAPHIC-EQ Setting and adjusting of graphic equalizer...

  • Page 29: Menu Operation

    MENU Operation (Example: DVD mode) Touch in Operation Screen. (Example: setting screen of “DISPLAY UNIT” Note : ¡ The display returns to the previous status if there is no operation for more than 60 seconds after changing to the set- ting menu.

  • Page 30: Display Unit

    (Fill in the ID code memo page 46).) If you forget it, you will be unable to use the unit. In case you forget the ID code, please consult your nearest Panasonic Service / [SRC]. Center. default: HOUR ADJUST: 0...
  • Page 31 MEMORY CLEAR Memory clearance The state of all of the current memories are returned to default settings. Note: ¡The ID code is not deleted by executing memory clear. : clears the memory to default settings. : no memory clear. The display returns to the previous one. REALLY? is selected.
  • Page 32 Settings (continued) SCREEN USER AUDIO (Display) DIMMER Adjusting the brightness AUTO : automatically adjusted according to ambient light intensity. Darker Brighter PICTURE Display appearance CONTRAST (Adjust the image contrast) : decreases the contrast between black and white. : increases the contrast between black and white. BRIGHT (Adjust the image brightness) : darkens.
  • Page 33 ¡To set the level to flat, touch and hold for more than 2 seconds. ¡Expectable effects vary with the audio format to be used, settings in the menu, and other factors. CS Auto CS Auto Setting SELECT (Customizing the setting) FOCUS (Raises the sound image) FRONT FOCUS...
  • Page 34 Settings (continued) (AUDIO continued) SP SETUP (Speaker set up) Setting the absence/presence and size of each speaker FRONT (Front speaker setting) SMALL : for small speakers, or when bass playback is not possible : for large speakers, when bass playback is LARGE possible (at least 100 Hz or lower) CENTER...
  • Page 35 Note: ¡While the private mode is active, only adjusted. TEST TONE (Test tone output) : enables the test tone. : disables the test tone. ¡ When the test tone is set to on, test signal (a continu- ous tone) is output from each speaker for approximately 2 seconds.
  • Page 36 Settings (continued) USER SCREEN AUDIO LANGUAGE Language Setting MENU (DVD menu language) : English : Chinese : French OTHER : other language. Input the language code. page 49) SUBTITLE (Subtitle language) N ote: ¡A disc supporting closed captioning and subtitles may overlap each other on the screen.

  • Page 37: Input Select

    DVD SOUND DVD sound setting PRO LOGIC (5.1 channel listening in Dolby surround sound) : activates Pro Logic. : inactivates Pro Logic. Note : ¡ This setting is enabled only in the DVD/VCD/CD player mode. ¡ selection in some audio settings may disable audio output from the subwoofer.
  • Page 38 Settings (continued) USER SCREEN AUDIO INPUT/OUTPUT FM SETUP Setting for FM stations NOISE SUPPRESSION (FM IF filter switching) AUTO : adjusted automatically NARROW : narrows the frequency bandwidth to be received to prioritize noise reduction. WIDE : widens the frequency bandwidth to be received to prioritize sound quality.

  • Page 39: Other Settings

    ASPECT CQ-VD7005W P·MODE CQ-VD7001U MUTE MENU NAVI Aspect Ratio Default: NORMAL Mode: 4 types Press and hold [ASP] on the display unit to change the aspect ratio as follows. NORMAL ¡The conventional display image has a 4 to 3 ratio of horizontal to vertical.
  • Page 40 Settings (continued) Other Settings (continued) ASPECT CQ-VD7005W P·MODE CQ-VD7001U MUTE MENU NAVI Private Mode You can mute the sounds from the rear speakers if nec- essary. Activation of the private mode allows you to enjoy the front monitor and rear monitor independently with different sources at the same time.

  • Page 41: Troubleshooting

    Service Center. The product should be serviced only by qualified personnel. Please refer checking and repair to professionals. Panasonic shall not be liable for any accidents arising out of neg- lect of checking the unit or your own repair after your checking.
  • Page 42 Troubleshooting Radio Poor reception or noise The number of auto preset stations is less than 6. Preset stations cannot be stored. No playback or disc ejected Sound skipping or noise Sound skipping due to vibration Disc unejectable CQ-VD7005W (continued) Antenna installation or wiring of antenna cable is faulty. aCheck whether the antenna mounting position and its wiring are correct.
  • Page 43 MP3/WMA No playback or disc ejected The CD-R/RWs that are playable on other devices are not playable on this unit. Sound skipping or noise Note: ¡Refer to “Notes on MP3/WMA” Cannot switch the audio language/subtitle language/angle. The audio/subtitle language selected in the DVD settings is not used.

  • Page 44: Display Settings

    Troubleshooting Display Settings The brightness of the screen is not stable. The picture is dark. The picture is whitish. Something is wrong with the picture. The picture is light in color. The display does not go back into the unit. Remote Control Unit No response to pressing buttons...

  • Page 45: Sound Settings

    Sound Settings No sound from left, Cables are not correctly connected. right, front, or rear aConnect the cables correctly. speaker. Left and right sounds are The speaker leads are connected in reverse between right and left. aConnect the speaker wires to the correct one. reversed.
  • Page 46 ¡ There may be cases when the disc numbers affected by an error are displayed before “NON PLAYABLE DISC”. In case you forget the ID code... In case you forget the ID code, please consult your nearest Panasonic Service Center. ID code memo Copy the memo below, fill in the ID code, and keep it in a secure location.

  • Page 47: Maintenance

    Product Servicing If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic Service Center. The product should be serviced only by a qualified technician. Replacing the Fuse Use fuses of the same specified rating (15 A). Using dif-...

  • Page 48: Notes On Discs

    Notes on Discs How to hold the disc ¡ Do not touch the underside of the disc. ¡ Do not scratch the disc. ¡ Do not bend disc. ¡ When not in use, keep disc in the case. Printed side Do not use discs that fit any of the descriptions given below.

  • Page 49: Language Code List

    Language Code List DVD language menu page 36) Code Language Name 6565 Afar 6566 Abkhazian 6570 Afrikaans 6577 Ameharic 6582 Arabic 6583 Assamese 6589 Aymara 6590 Azerbaijani 6665 Bashkir 6669 Byelorussian 6671 Bulgarian 6672 Bihari 6678 Bengali; Bangla 6679 Tibetan 6682 Breton 6765...

  • Page 50: Definition Of Terms

    Definition of Terms Dolby Digital This fully discrete format divides the music signals into 5.1 channels: Front Left (L), Front Right (R), Center (C), Left Surround (LS), Right Surround (RS) and Subwoofer (SW: 0.1 channel) for recording and playback. The number of channels that are recorded depends on the software.

  • Page 51: Specifications

    Specifications General ¡Power supply : 12 V DC (11 V – 16 V), test voltage 14.4 V, negative ground ¡Current consumption : Less than 10 A (during disc playback) ¡ Power Output : 18 W x 4 ch (1 kHz, 1 %, 4 Ω) ¡Maximum power output : 50 W x 4 ch ¡Compatible speaker : 4 Ω...
  • Page 52 CQ-VD7005W Matsushita Electric Industrial Co., Ltd. Web Site : http://panasonic.net YFM284C675CA PTW0107-1027 Printed in China...

  • Page 53: Cq-Vd7005W

    Installation Instructions àÌÒÚÛ͈Ëfl ÔÓ ÏÓÌÚ‡ÊÛ CQ-VD7005W Model: TEXT...
  • Page 54 Safety Information CAUTION: • PLEASE FOLLOW THE LAWS AND REGULATIONS OF YOUR STATE, PROVINCE OR COUNTRY FOR INSTALLATION OF THE UNIT. • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPLIANCE TO RAIN, SPLASHING, DRIP- PING OR MOISTURE.
  • Page 55 Upgrade Options TV Tuner (CY-TUP133W/CY-TUN133W, option) CD Changer (CX-DP880, option) DVD Changer (CX-DH801W, option) Contents Safety Information...2 Upgrade Options ...3 Installation ...4 Electrical Connections ...10 Main Unit Rear Monitor CQ-VD7005W Hands-Free Kit featuring Bluetooth (CY-BT100N, option) Expansion Module (CY-EM100N, option) iPod ®...

  • Page 56: Installation Precautions

    This product should be installed by a professional installer, if possible. In case of difficulty, please consult your nearest author- ized Panasonic Service Center. 1. This system is to be used only in a 12 V DC battery system (car) with negative ground.
  • Page 57 Installation Hardware (For Installation) Item Trim Plate Mounting Collar Mounting Spring Mounting Bolt (5 mmø) Tapping Screw ø x 16 mm) Hex. Nut (5 ø) Rear Support Strap Round Head Screw (5 mmø x 6 mm) Flat-Head Screw (5 mmø x 6 mm) Round Head Screw (4 mmø...
  • Page 58 Installation Installation Procedures (When using Mounting Collar w) Note: ¡The car model, installation condi- tions and combination of the units used may impose some restric- tions on opening and closing the monitor as well as on the angle and position to which the monitor can be adjusted.
  • Page 59 Method for Fixing the Mounting Spring Two holes of the mounting spring allow you to select between two mounting types as shown below. (A) Regular installation method A few millimeters of console projecting o Flat-Head Screw o Flat-Head Screw Method for Fixing the Rear of the Unit (a) Using the Rear Support Strap u.
  • Page 60 Installation Installation Procedures (When not using Mounting Collar w) Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with car manufacturers, car types and manufacturing year. Please consult your nearest dealer or installer. Select mounting screws according to the hole positions and hole shape of the bracket.
  • Page 61 Connecting the Side Brake (Parking Brake) Connection Lead Caution ¡For safety, be sure to ask your nearest professional installer to do this connection. Hand brake The side brake (parking brake) switch position varies with car model. For details on the exact location of the side brake (parking brake) switch in your car, contact your dealer.

  • Page 62: Electrical Connections

    ¡Run the cords avoiding the spots where the temperature can be extremely high. Navi Mute Lead (Orange) Connect to the Navi Mute Lead of the Panasonic car navigation system. (available in future) NAVI MUTE ANT-CONT MAX 0.1A Motor Antenna Relay Control Lead (Blue) (To motor antenna) (Max.
  • Page 63 : This book refers to connections to the Panasonic car navigation system that will come onto the market in the future. Descriptions regarding the car navigation system are boxed with a dotted line.
  • Page 64 Electrical Connections Connection with DVD Changer (CX-DH801W) Note: ¡ Refer to the operating instructions for the connected devices, in addition. DVD Changer CX-DH801W Ground Lead (Black) To a clean, bare metallic part of the car chassis Battery Lead BATTERY 5 A (Yellow) To the car battery, continuous +12 V DC Power Lead (Red) (not used) (R) (Red)
  • Page 65 Connection with CD Changer (CX-DP880) Note: ¡ Refer to the operating instructions for the connected devices, in addition. (Supplied with CX-DP880) (R) (Red) RCA Cord (L) (White) System-up connector CD Changer CX-DP880 (option) Power Connector CHANGER IN DIN Connector Conversion Cable for DVD/CD Changer (CA-CC30N, option) Ground Lead (Black) To a clean, bare metallic part of the car...
  • Page 66 Electrical Connections Connection with Expansion Module (CY-EM100N) Note: ¡ Refer to the operating instructions for the connected devices, in addition. (Video) (Yellow) (L) (White) (Red) Camcorder (option) Expansion Module CY-EM100N DVD Changer CX-DH801W (option) VIDEO-CNT (L) (White) (R) (Red) CQ-VD7005W (R) (Red) (L) (White) VIDEO OUT...
  • Page 67 Connection with Rear View Camera Note: ¡ Refer to the operating instructions for the connected devices, in addition. CQ-VD7005W (Rear) CAMERA-IN Camera Input Terminal (Yellow) REVERSE Reverse Lead (Violet/white stripe) Connecting the Reverse Lead If using an optional rear view camera, the reverse lead must be connected.
  • Page 68 ¡ Please observe what shapes the connectors of the connecting devices are and where each of them is connected to in order to establish a proper connection. STAND BY (R) COLOR LCD MONITOR ON (G) Panasonic VM1500 Example: (R) (Red) (Video) (Yellow)
  • Page 69 Connection with TV Tuner Note: ¡ Refer to the operating instructions for the connected devices, in addition. AMP-CONT MAX 0.1 A !3 Power Connector CQ-VD7005W (Rear) (not used) (Video) (Yellow) RCA Cord (supplied with CY-TUP133W/ CY-TUN133W) External Amplifier Control Power Lead Note: ¡Connect both the power control lead of the TV tuner and the amplifier control connector of the external amplifier when the TV tuner and external amplifier are...
  • Page 70 Matsushita Electric Industrial Co., Ltd. Web Site : http://panasonic.net YFM294C099CA PTW0107-1027 Printed in China...
  • Page 71 System Upgrade Guidebook àÌÒÚÛ͈Ëfl ÔÓ ‡Ò¯ËÂÌ˲ ÒËÒÚÂÏ˚ CQ-VD7005W Model:...
  • Page 72 They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual.
  • Page 73 Installation of this unit requires special skills and experi- ence. For maximum safety, have it installed by your dealer. Panasonic is not liable for any problems resulting from your own installation of the unit. Follow the instructions to install and wire the prod- uct.
  • Page 74 Before Reading These Instructions Panasonic welcomes you to our constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company.
  • Page 75 ¡Market conditions regarding optional devices vary with countries and regions. For further information, consult your dealer. ¡If a non-Panasonic product is connected to this unit, we do not guarantee the operations of the product. ¡If iPod with Video is connected, no more iPod can be con- nected.
  • Page 76 Before Reading These Instructions Simultaneous Multi-Device Connection CQ-VD7005W System-up Connector Only 1 unit Up to 4 units Expansion Module (CY-EM100N, option) Note: ¡ Refer to individual instruction and instal- lation manuals for each device for detailed installation and wiring. CQ-VD7005W System upgrade sample Conversion Cable for DVD/CD Changer (CA-CC30N, option)
  • Page 77 Before Reading These Instructions...4 Touch Panel Operation Overview...8 Each Source TV Tuner Control...10 CD Changer Control...12 DVD Changer Control ...13 Bluetooth Hands-Free Kit ...16 iPod Control...18 Center Speaker: EAB-CF2 Panasonic Power amplifier CQ-VD7005W Front Speakers: CJ-DA1733 Surround Speakers: CJ-DA6923 Subwoofer: CJ-SW3003 Power amplifier Settings Settings ...20...

  • Page 78: Touch Panel Operation Overview

    Touch Panel Operation Overview Notes on the Touch Panel Before operation ¡Clean the surface of the touch panel. Instructions) Operation ¡Use only your fingers to operate the touch panel. ¡Do not press the panel forcefully. ¡Do not scratch the panel with fingernails or any hard objects.
  • Page 79 Switching the Display Touching allows users to switch between screens as follows. How to Call up Operation Screen Source CD Changer page 12) iPod page 18) How to Cancel OSD (On Screen Display) Source TV tuner page 10) DVD Changer page 13) To switch Operation Screen ON, touch the center of touch panel or press [ENTER].

  • Page 80: Tv Tuner Control

    TV Tuner Control Preparation: ¡ Connect a TV tuner (CY-TUP133W/CY-TUN133W, option) to the unit. ¡It is required to install the TV antenna to receive TV broadcasts. TV Mode Selection q Touch “Source Button”. Press [SRC] to change to the TV mode. To switch Operation Screen ON, touch the center of touch panel or press [ENTER].
  • Page 81 Preset Memory Operations 12 channels with first to 12th highest in signal strength will be preset to each band. Auto Preset Memory ¡ Touch/press and hold for more than 2 seconds. ¡ “–” appears if the number of receivable channels is less than 12. New channels overwrite existing saved channels.

  • Page 82: Cd Changer Control

    CD Changer Control ¡CD changer functions are designed for optional Panasonic CD changer unit. (CX-DP880) CD Changer Mode Selection q Touch “Source Button”. Press [SRC] to change to the CD Changer mode. To switch Operation Screen ON, touch Basic Operations...

  • Page 83: Dvd Changer Control

    To switch Operation Screen ON, touch the center of touch panel or press [ENTER]. Note: ¡Be sure to connect RCA cord (video)(yellow) of the Panasonic DVD Changer to AV2-IN and set page 20). Otherwise the CH VIDEO INPUT changer cannot be controlled through this unit.
  • Page 84 DVD Changer Control Basic Operations (continued) Slow Playback Disc Selection …… Touch/Press and hold Chapter/title/track Selection Showing menu and selecting an item * Note on VCD: For VCD, press [RETURN] instead of [DVD MENU] . CQ-VD7005W (continued) Note: ¡Reverse slow playback is not possible. –...
  • Page 85 CQ-VD7005W...

  • Page 86: Bluetooth Hands-Free Kit

    Bluetooth Hands-Free Kit Preparation: ¡Connect the Bluetooth hands-free kit (CY-BT100N) and establish the pairing. Refer to the instruction manual for the Bluetooth hands-free kit for further information. Bluetooth Hands-Free Mode This mode is not selectable by pressing [SRC] or touch- ing an item on the panel, but activated by receiving an incoming call.
  • Page 87 Useful Function Operations Adjustment of Ring Adjust the volume when a call is coming in. Volume – When the ringtone is the same as that of the cellu- lar phone, – When the ringtone is not Adjust the volume when a call is coming in. the same as that of the cellular phone (but this unit-specific sound),...

  • Page 88: Ipod Control

    iPod Control Preparation: ¡Connect the iPod through connecting cable (CA-DC300N, option). iPod Mode Selection q Touch “Source Button”. Press [SRC] to change to the iPod mode. To switch Operation Screen ON, touch Note: ¡ Disconnect the iPod from this unit, reset the iPod, and connect the iPod again when a problem occurs including the following: the iPod is not recognized/the iPod is not operable from the iPod itself or this unit/the image or sound from the iPod con-...
  • Page 89 Useful Function Shuffle Songs Shuffle Albums Note: ¡The shuffle function of iPod corresponds to the RANDOM function of this unit. Repeat Play Note: ¡The All Repeat Play function of iPod is always activated and cannot be canceled from this unit. ……...

  • Page 90: Settings

    : down, : up Connection with Panasonic car navigation system : This book refers to connections to the Panasonic car navigation system that will come onto the mar- ket in the future. Descriptions regarding the car navigation system are boxed with a dotted line.
  • Page 91 OUTPUT SELECT Output Selection REAR MONITOR (Rear Monitor Set up) You can have different picture and sound on the front and rear monitors at the same time. Preparation: Connect another optional rear monitor. Installation Instruction) When the Expansion Module (CY-EM100N, option) is disconnected: AUTO : same as front monitor*...

  • Page 92: Troubleshooting

    Service Center. The product should be serviced only by qualified personnel. Please refer checking and repair to professionals. Panasonic shall not be liable for any accidents arising out of neg- lect of checking the unit or your own repair after your checking.
  • Page 93 [ u ]. If failure persists, press the reset switch. (Press the reset switch in the CD changer). If normal operation is not restored, call the store where you purchased the unit or the nearest Panasonic Service Center. The type of the file that is selected is not supported.
  • Page 94 Matsushita Electric Industrial Co., Ltd. Web Site : http://panasonic.net YFM284C676CA PTW0107-2037 Printed in China...

This manual is also suitable for:

Cq-vd7005w

Table of Contents