Advertisement
154569/1166-220
5/17/02
1:39 PM
Getting the most out of your tool.
Please take time to read this manual and pay particular attention to the safety
rules we've provided for your protection. Don't forget to send in your owner's
registration card. If you have any questions about your tool please call:
1-800-9-BD TOOL
(1-800-923-8665)
CHUCK
TRIGGER
SWITCH
LOCKING
BUTTON
1166-220 3/8" VSR Drill
Page 1
WARNING: When using electric tools, basic safety precautions should
always be followed to reduce risk of fire, electric shock, and personal injury,
including the following:
Double Insulation
Double insulated tools are constructed throughout with two separate layers
of electrical insulation or one double thickness of insulation between you and
the tool's electrical system. Tools built with this insulation system are not
intended to be grounded. As a result, your tool is equipped with a two prong
plug which permits you to use extension cords without concern for main-
taining a ground connection.
REVERSING
NOTE: Double insulation does not take the place of normal safety precautions
LEVER
when operating this tool. The insulation system is for added protection against
injury resulting from a possible electrical insulation failure within the tool.
CAUTION: WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT
PARTS. Repair or replace damaged cords.
Safety Instructions For All Tools
•
•
•
220 VOLT PLUG
•
1
FOR YOUR SAFETY - ALL TOOLS
READ ALL INSTRUCTIONS
KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
CONSIDER WORK AREA ENVIRONMENT. Don't expose power tools to rain.
Don't use power tools in damp or wet locations. Keep work area well lit. Do
not use tool in presence of flammable liquids or gases.
GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded
surfaces. For example; pipes, radiators, ranges, and refrigerator enclosures.
KEEP CHILDREN AWAY. Do not let visitors contact tool or extension cord.
All visitors should be kept away from work area.
Advertisement
