Using The Network Standby On Function - Samsung HW-J8500R User Manual

FUNCTIONS
+ Launching the Samsung Multiroom app
To launch the Samsung multiroom app, tap the multiroom app icon on your smart device.
COnneCting tHe SOUnDBaR tO yOUR netWORK
on your smart device, select the Samsung multiroom app. follow the directions on your smart device's screen.
● Use Cat 7 (*STP Type) cable for the connection.
* Shielded Twist Pair
USInG THe neTWorK STanDBy on
fUnCTIon
The network Standby on function becomes available if a wireless connection has been properly established between
a smart device and the Soundbar. This function turns on the Soundbar automatically when a smart device attempts to
connect to the Soundbar via Bluetooth or Wi-fi. If you turn the Soundbar on via a Bluetooth connection, its input
mode is set to BT automatically. To turn the Soundbar on via Wi-fi, you must have the Samsung multiroom app
installed on your smart device.
1. Connect the smart device to your Soundbar.
2. Turn the network Standby on function on by pressing the ] button on the Soundbar remote for more than 5
seconds. you can turn the function off by pressing the ] button again for more than 5 seconds.
● network Standby on is available only if the Soundbar is listed among the smart device's paired devices.
(The Smart device and the Soundbar must have been previously paired at least once.)
● Soundbar will appear in the smart device's searched devices list only when the Soundbar is displaying [BT
reaDy] or [Wifi reaDy].
● In the TV SoundConnect mode, the Soundbar cannot be paired to another smart device.
● If the network Standby on function did not work:
- The network Standby on is set to off. Set it to on.
● The Wi-fi connection to the Soundbar will be terminated if the Soundbar's power cord is disconnected or
the power is cut off. If the power is cut off, turn on the Soundbar and reconnect it.
28