Panasonic AG-HMC150 Menu Information page 9

SW MODE screen (continued)
Display
Item
mode
USER3 (Camera)
(PB)
FOCUS (Camera)
ASSIST
WFM (Camera)
LCD (Camera)
(PB)
Assigns a function to the USER3 button.
The setting contents are the same as USER1.
INDEX
Assigns a function to the FOCUS ASSIST button.
EXPANDED: The central part of the screen will be enlarged by a factor of about
4 in the vertical direction and by a factor of about 6 in the horizontal
direction.
"EXPANDED" is displayed on the screen during the expanded
display.
GRAPH: Displays a frequency distribution graph at the top right in the viewfinder
and LCD monitor.
BOTH: Magnifies the center portion of the image and displays a frequency
distribution graph.
(The frequency distribution graph is displayed on either the viewfinder or
the LCD monitor.)
Switches the waveform display that appears when the WFM button is pressed.
WAVE: Displays as a waveform. Each time the button is pressed the
setting changes in this order: OFF → WAVE (waveform) → OFF.
VECTOR: Displays as a vector. Each time the button is pressed the setting
changes in this order: OFF → VECTOR → OFF.
WAVE/VECTOR: Each time the button is pressed the setting changes in this order:
OFF → WAVE (waveform) → VECTOR → OFF.
Assigns a function to the LCD button.
LCD REV: Flips the LCD image vertically and horizontally.
LCD BL: Switches the brightness of the LCD backlight.
• The backlight brightness setting registered in LCD BL will remain stored
even if the function allocated to the LCD button is changed.
Description of settings
indicates the factory setting.
89