Using The Projector; Connecting To An Antenna Or Cable - LG PW1500 Owner's Manual

USING THE PROJECTOR
Connecting to an Antenna or Cable
To watch TV using an indoor/
outdoor antenna, connect a wall
terminal and the
port of the Projector using an RF
cable (75 Ω).
You can watch terrestrial or cable
(analog or digital) TV.
(The RF cable is sold separately.)
NOTE
• Make sure not to bend the copper wire of the RF cable (75 Ω). Turn
the input jack to the right to fasten it.
Copper wire
• Ensure you use a standard coaxial cable (75 Ω, sold separately)
when connecting to the projector input.
• For better image quality in locations where signal strength is low,
purchase and install a signal amplifier (booster).
• A signal splitter is required if you want to use two or more projectors
through one antenna.
• If you have any problems when installing the antenna, please consult
a suitable retailer or the store where you purchased the antenna.
USING THE PROJECTOR
31