Important Error Messages - Panasonic EB-X400 Operating Instructions Manual

Troubleshooting

Important error messages

These are some of the most important error messages which may be displayed:
Failed
SIM blocked
Insert SIM
Invalid SIM
Function unavailable
PIN2 invalidated
Message rejected.
Storage full
or
Message rejected.
SIM full
Too many characters.
This message may not be
stored
Verification failure
Auto redial list full
82
Roaming in the selected area is not allowed.
Roaming with the selected network is not allowed.
The network has detected an authentication failure because your SIM is not
registered with that network – contact your service provider.
The SIM is blocked because the PIN unblocking key (PUK) has been entered
incorrectly ten times – contact your service provider.
The phone has detected a problem with the SIM – switch the phone off and then
back on; if the message is still displayed contact your service provider.
The SIM has failed one or more of the SIM personalisation checks – contact
your service provider.
The selected feature is either not supported by the SIM or is not available with
the current subscription – contact your service provider.
The PIN2 is blocked permanently because the wrong PUK2 has been entered
ten times, services controlled by PIN2 cannot be used – contact your service
provider.
A message has been received but the message store is full – to receive
messages, delete some of the currently stored messages.
The edited or newly created contact number is too long for the SIM.
The message area is full. Your messages cannot be stored until some of the
currently stored messages are deleted.
On changing the PIN/PIN2, verification of the new code is incorrect – retry
changing the PIN/PIN2 with correct verification.
Redial list of unsuccessfully dialled numbers is full – switch the phone off and
then on again.