LG CED-8083B Service Manual page 45

• How to use Test Tool (Dragon)
A. Start
1. Install CED-8080B(CED-8083B) –> PC Power ON –> Execute Windows.
2. Execute Dragon.exe on Windows (Dragon.exe & dragon.cfg should be on same Directory).
3. If you use CED-8080B(CED-8083B) "E4 Dragon Ver xxx(E5 Dragon Ver xxx)" will be displayed on the Window.
4. Select Setup/Setup I/F on the menu bar.
5. Select ATAPI I/F and then Click OK(Don't "Select Transfer Rate")
6. Select Setup/Target Select on the menu bar.
7. Select Number of Host(#0 or #1) appropriately, then
"CED-8080B(CED-8083B)" displays on "Target Device"
8. Select "CED-8080B(CED-8083B)" on Target Device, and then
Click OK.
B. Check Calibration Data
1. Select Calibration/Calibration on the menu bar.
2. Click Read on Calibration window
–> Calibration Data values display.
3. Check Data Values.
[CED-8080B]
CD-R VRDC DAC : 30~150
VWDC1
VWDC2
VWDC2 Offset
[CED-8083B]
CD-R VRDC DAC : 30~150
VWDC1
VWDC2
VWDC2 Offset
4. Close Calibration window.
[Target Select window]
: 48~112
: 50~155
: 0~35
: 48~150
: 50~120
: 0~35
[I/F Setting window]
[Calibration window]
69