Table of Contents
Advertisement
14 www.aeg.com
6.6 Energy saving
The appliance contains features
which help you save energy
during everyday cooking:
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10% earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than
30 minutes or you must use the
7. CLOCK FUNCTIONS
Symbol
If you set the time for a clock function,
the time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90 % of the set time.
The appliance uses the residual
heat to continue the cooking
process until the time ends (3 -
20 minutes).
Setting the clock functions
1.
Set a heating function.
2.
Press
display shows the necessary clock
function and the related symbol.
3.
Press
time. Press OK to confirm. When the
time ends, an acoustic signal
sounds. The appliance deactivates.
The display shows a message.
Function
To set a countdown (max. 2 h 30 min). This func-
tion has no effect on the operation of the appli-
ance. You can also activate it when the appliance
Minute Minder
is deactivated. Use
Press
To set how long the appliance has to be in opera-
Duration
tion (max. 23 h 59 min).
To set the switch-off time for a heating function
End Time
(max. 23 h 59 min).
again and again until the
or
to set the necessary
clock functions ( Duration , End
Time ).
– When the appliance is off, you can
use the heat to keep food warm.
The display shows the remaining
temperature.
• Cooking with the lamp off - touch
and hold
for 3 seconds to deacti-
vate the lamp during cooking.
• Eco functions - refer to section "Heat-
ing Functions" (for selected models
only).
Description
to activate the function.
or
to set the minutes and OK to start.
4.
Press a sensor field to stop the sig-
nal.
Useful information:
• With Duration and End Time you must
set the heating function and the tem-
perature first. Then you can set the
clock function. The appliance deacti-
vates automatically.
• You can use Duration and End Time at
the same time, if you want to automat-
ically activate and deactivate the ap-
pliance on a given time later.
• When you use the Core Temperature
Sensor (if applicable), the Duration
and End Time functions do not work.
7.1 Heat + Hold
The Heat + Hold function keeps pre-
pared food warm at 80 °C for 30 mi-
nutes. It activates after the baking or
roasting procedure ends.
Advertisement
Table of Contents
