Caution For Handling Of Rotor - Makita DHP480 Technical Information

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Rotor, Gear assembly (cont.)

Caution for Handling of Rotor

When handling or storing multiple Rotors, be sure to keep a proper distance between Rotors as shown in Fig. 9A
because Rotor is a strong magnet, failure to follow this instruction could result in:
• Finger injury caused by pinching between Rotors pulling each other
• Magnetic loss of Rotors or damage on the magnet portion of Rotor. (Fig. 9B)
Fig. 9A
ASSEMBLING
(1) Pass Rotor into Stator complete as drawn in Fig. 10.
Fig. 10
1. Holding Stator complete on a workbench, slowly insert Rotor
in Stator complete until Rotor's drive end reaches the workbench.
Rotor
Stator complete
(2) Mount Leaf spring to Housing L, and join Gear assembly with Motor section. (Fig. 11)
Fig. 11
1. Put Leaf spring in place as drawn below.
Leaf spring
Fig. 9B
* Magnetic loss of Rotors
* Damage on the magnet portion of Rotor
2. Before pushing Rotor section (Rotor and Stator) fully
in Gear assembly, make sure that Rotor's gear engages
with the super gears of Gear assembly to rotate them
smoothly.
Motor section
2. When the drive end of Rotor
reaches the workbench, lift up
Stator complete slowly.
Gear
assembly
P 6/ 12