Dell C7017T User Manual page 40

Display
Aspect Ratio
Horizontal
Position
Vertical Position
Sharpness
Pixel Clock
Phase
Response Time
Reset Display
40 Operating the Monitor
Use the Display menu to adjust the monitor's display settings.
Adjusts the image ratio as Wide 16:9, 4:3, or 5:4.
NOTE: Wide 16:9 adjustment is not required at maximum preset
resolution 1920 x 1080 .
Use or the buttons to adjust image left and right. Minimum
is '0' (-). Maximum is '100' (+).
Use the or buttons to adjust image up and down. Minimum
is '0' (-). Maximum is '100' (+).
NOTE: Horizontal Position and Vertical Position adjustments are
only available for "VGA" input.
This feature can make the image look sharper or softer. Use
or to adjust the sharpness from '0' to '100'.
The Phase and Pixel Clock adjustments allow you to adjust your
monitor to your preference. Use
best image quality.
If satisfactory results are not obtained using the Phase
adjustment, use the Pixel Clock (coarse) adjustment and then use
Phase (fine), again.
NOTE: Pixel Clock and Phase adjustment are only available for
VGA input.
Allows you to set the Response Time to Normal or Fast.
NOTE:
Normal (G to G typical /Ave.) : 8 ms
Fast (G to G typical /Ave.) : 6 ms
Select this option to restore default display settings.
or buttons to adjust for