Maintenance - Hitachi C 10RC Instruction Manual And Safety Instructions

English

MAINTENANCE

MAINTAINING YOUR TABLE SAW
WARNING
For your own safety, turn the switch off and remove the plug from the power source outlet before maintaining
or lubricating your table saw.
GENERAL MAINTENANCE
Occasionally use a cloth to wipe off chips and dust from the machine. And oil the rotary parts once a month to extend
the tool life. Do not oil the motor.
Brush Inspection
Check the motor brushes after the fi rst 50 hours of use for a new machine or after a new set of brushes have been
installed. After the fi rst check, examine them every 10 hours of use.
When the carbon is worn to 0.2 mm in length or if the spring or shunt wire is burned or damaged, replace both brushes.
If the brushes are found serviceable after removing, reinstall them.
– 21 –