Connecting Water Supply Hose - LG WT4801CW Service Manual

2-2. CONNECTING WATER SUPPLY HOSE

Before connecting the Water Supply Hose to the water tap, check the hose type and then choose the
correct instruction here under.
Screw Type
1
Attach the water supply hose to the tap.
Push the water supply hose up so that the rubber packing
within the hose can adhere completely to the tap.
2
Connect the water supply hose to the tap.
Connect the water supply hose to the tap and then tighten it by
screwing it to the right.
3
Check water leakage. Check water leakage.
After connecting the hose, open the tap to check for After connecting the hose, open the tap to check for
any water leakage. any water leakage.
Connecting Water Supply Hose to the machine
• Connect the water supply hose to inlet valve of
the washing machine, and then lock it by turning
the hose connecting part.
• Check to see if there is a rubber seal inside the
connector.
• A nwe washing machine should be instailed with new
hoses. The old hoses shuld not be reused.
Water tap
Water Hose
(to water inlet
on washer)
Rubber Seal
6
Rubber Seal
Water Supply Hose
Hot
Cold
Rubber Seal
Water Hose
(to tap)