LG WT4801CW Service Manual page 23

Hall Sensor
Stator Housing
Water Guide
SNAP RING.
23
⑤ Loosen the 6 fixing screws on the stator.
(Lower upper position screws)
⑥ Check the direction of SNAP RING.
(The handle of snap ring is toward to rotor and stator.)
⑦ Preventing fallen the stator, tighten with one hand and
then loosen the last screw.
⑧ For assembly take care lead wire's state, it produce a
noise and cut attach the rotor.
7) Replacement of Bearing housing asm
① Loosen 14 Fixing screws on the Bearing Housing ASM
and pull up it.