Makita BVF104 Technical Information page 4

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Switch
DISASSEMBLING
(1) Remove two receptacles from DC motor as mentioned in the previous pages.
(2) Remove Cover assembly. Loosen three M5x10 screws and separate Battery housing from Tank complete. (Fig. 14)
(3) Remove two receptacles from Switch terminals. (Fig. 15)
(4) Pressing the leaf spring portions of Switch with screwdriver, push out Switch to Cover assembly side. (Fig. 16)
Fig. 14
Receptacles
disconnected
from DC motor
Battery
housing
Cover assembly
Fig. 15
Receptacle
Switch
ASSEMBLING
Take the disassembling step in reverse.
M5x10 Screw
(3pcs.)
Battery
housing
Fig. 16
P 4/ 7