Honeywell WEB-700 Installation Instructions Manual page 4

WEB-700 WEB-700-O CP-700
WEB-700; WEB-700-O; CP-700
.
USB ports (2)
Main controller board
Fig. 2. WEB/CP-700 main controller board and 2 option cards uninstalled.
As a 7 series controller, the WEB/CP-700 uses a PowerPC 440EPx processor, 1GB Flash storage, and 512MB DDR-2 RAM. A
1GB RAM upgrade module is available. TCP/IP access is via two standard Gigabit Ethernet ports. Serial communications ports
(RS-232, RS-485) are standard.
One or two option cards can be added for additional communications, e.g. LonWorks FTT-10, or another RS-232 port. A MiniPCI
slot is also available for future WiFi 802.11g support. The WEB/CP-700 uses the QNX Neutrino operating system, with the IBM J9
JVM.
Two status LEDs are visible atop the cover. Two USB 2.0 ports are provided, as well as integral contact inputs to allow system
monitoring of UPS power and battery, and an external enclosure door. A rechargeable NiMH battery pack is included inside the
unit, and a separate connector provides recharging and monitoring of an external 12V sealed lead-acid battery ordered
separately.
The table below provides a summary of features of the WEB/CP-700 controller model.
Model
WEB-700-O DIN-mountable controller. PowerPC 440Epx 667MHz processor, 1GB NAND
CP-700 Flash storage, 512MB base DDR-2 system RAM (upgradable to 1GB).
Includes integral NiMH battery pack, two open enhanced comm option card
slots, one open MiniPCI slot (for future use only, for WiFi 802.11g). Not furnished
is NPB-PWR-UN-H universal power supply, or external 12V sealed lead-acid
battery and harness.
Memory upgrade ordered separately.
.
95-7776—01
Removed
option cards
Table 1. WEB/CP-700 features and options
Description
Connector ports
4
NiMH battery pack
and shield removed
DIN-mount base with screw tabs
for panel mount
Ports
Two 1GB Ethernet,
RJ-45
One RS-232 Serial,
DB-9 male
One RS-485 Serial,
isolated, with 15V/
12Vdc power, 6-position
plug on right side.
Two USB-2.0 ports on
top side of controller.