Setting The Type Of Heating And Temperature; Recommended Settings; Setting Rapid Heating - Siemens HB38GB.90 Instruction Manual

Setting the type of heating and temperature

Example in the picture: Setting for
180 °C.
Press the button.
‡
3D hot air and 160 °C are suggested in the display. You
:
can apply this setting immediately with the
If you wish to choose another type of heating and temperature,
proceed as follows:
Turn the rotary selector to set the desired type of heating.
1.
  7\SHV RI KHDWLQJ
7RS
ERWWRP KHDWLQJ
Use the button to switch to the temperature and set the
¿
2.
temperature using the rotary selector.
  7\SHV RI KHDWLQJ
7RS
ERWWRP KHDWLQJ
Press the † button.
3.
Operation starts. The heating bars of the temperature
indicator appear in the status bar.
3UHKHDWLQJ
 
7RS
ERWWRP KHDWLQJ
Once the dish is ready, switch the oven off with the
4.
or select and apply a new operating mode.
Opening the oven door during cooking
Operation is suspended. When the door is closed again,
operation resumes.
Pausing operation
Press the † button. The oven is paused,
the button again, operation continues.
†
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Cancelling operation
Press and hold the button until 3D hot air, 160 °C appears.
†
You can make new settings.
Calling up information
Press the button briefly. For any information, press the
±
button again briefly. Before the appliance is started, information
is displayed on the types of heating, shelf positions and
accessories. After the appliance is started, you can check the
heating temperature in the cooking compartment.
Setting the cooking time
See section Time-setting options, setting the cooking time.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
10
% Top/bottom heating,
button.
†
   
 ƒ&
   
 ƒ&
 ƒ&
‡ button
† flashes. Press
±

Recommended settings

If you choose a dish from the recommended settings, the ideal
setting values are already specified. You can choose from
many different categories. You will find recommended settings
for a large number of dishes – from cake, bread, poultry, fish,
meat and game through to bakes and pre-prepared products.
You can change the temperature and cooking time. The type of
heating is fixed.
You can access the various dishes by navigating through
several selection levels. Try it out and see the range of dishes
for yourself.
Selecting a dish
Press the ‡ button.
1.
3D hot air, 160 °C are suggested in the display.
:
Turn the rotary selector anticlockwise to
2.
settings.
Move to the first food category with the
3.
the required category with the rotary selector.
Move to the next level with the
selector to make the next selection. The setting for the
selected dish now appears.
Press the † button.
4.
Appliance operation begins. You can see the suggested
cooking time counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
0:00. You can cancel the signal early by pressing the
x
button.
Changing the temperature or grill setting
Turn the rotary selector to change the temperature or grill
setting.
Changing the cooking time
Press the 0 button and move to the cooking time with the
button. Change the cooking time using the rotary selector.
Press the button.
0
Calling up information
Press the ± button briefly. For any information, press the
button again briefly.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.

Setting rapid heating

Rapid heating is not suitable for all types of heating.
Suitable types of heating
3D hot air
■
Top/bottom heating
■
HydroBaking
■
Pizza setting
■
Intensive heat
■
Suitable temperatures
Rapid heating will not work if the temperature is set to less than
100 °C. If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid heating is
not necessary. It will not switch on.
Recommended
j
button and select
¿
¿ button. Turn the rotary
0
±
x
¿