Troubleshooting; Cleaning And Maintenance - Black & Decker AV1210 Manual

Additional accessories -
AV1260 (fig. F & G)
- an extension hose (7) and a
hose connector (8)
- a brush (9) for carpets and
upholstery
- an extended crevice tool (10)
for the most difficult to reach
areas.
When not in use, the appliance
and the accessories can be
stored in the storage bag (11).
To fit an accessory, proceed as
follows:
Fit the hose connector onto
the nose of the appliance.
Attach one end of the hose to
the connector.
Attach the appropriate
accessory to the other end of
the hose.

TROUBLESHOOTING

If the product does not work,
follow the instructions below. If
this does not solve the problem,
please contact your local
Black & Decker repair agent.
Make sure the connector (4) is
plugged into the cigarette
lighter socket correctly.
Make sure your vehicle
battery system is of the 12 V
negative ground type (see
"Electrical safety").
CLEANING AND
MAINTENANCE
Regularly clean the filters.
Cleaning the dust bowl and
filters (fig. H, I, J & K)
The filters are re-usable and
should be cleaned regularly.
Press the release button (2)
and remove the dust bowl (3)
(fig. H).
Remove any dust from the
dust bowl (fig. I).
E N G L I S H
Remove the filters (12 & 13)
by twisting them clockwise
(fig. J).
Brush any loose dust off the
filters.
Wash the filters in warm, soapy
water (fig.K). The bowl can also
be washed if necessary.
Make sure the dust bowl and
filters are dry.
Refit the filters (12 & 13) onto
the appliance, twisting them
counterclockwise until they
lock into place.
Refit the dust bowl onto the
appliance. Make sure the dust
bowl clicks into place.
Important! Optimum dust
collection will only be achieved
with clean filters and an empty
dust bowl. If dust begins to fall
back out of the appliance after
switching it off, this indicates that
the dust bowl is full and must be
emptied.
Never use the appliance
without the filters.
Do not immerse the
appliance in water (fig. L).
Replacing the filters (fig. H & J)
The filters should be replaced
every 6 to 9 months and
whenever worn or damaged.
Replacement filters are available
from your Black & Decker dealer
(cat. no. VF20).
Press the release button (2)
and remove the dust bowl (3)
(fig. H).
Remove the filters (12 & 13)
by twisting them clockwise
(fig. J).
Fit the new filters (12 & 13)
onto the appliance, twisting
them counterclockwise until
they lock into place.
Refit the dust bowl onto the
appliance. Make sure the dust
bowl clicks into position.
7