Radio - Panasonic C7301U Operating Instructions Manual

Radio

This chapter explains how to listen to the radio.
1
Press [SRC] (Source) to select the
radio mode.
2
Press [BAND] to select a band.
Band
Preset Number
You can assign your favorite broadcasting station to
the [D·M] button. As the result of doing that, your
favorite broadcasting station can be received even if
the unit is in the CD mode, CD changer mode, XM
mode or AUX mode. (Default: FM 87.9 MHz)
D•M station Calling
Press [D . M] (Direct Memory).
D•M station Setting
q Select a station you would like to preset.
w Hold down [D . M] (Direct Memory) for 2 sec. or
more.
20
CQ-C8401U/C8301U/C7401U/C7301U
SRC SRC CQ-C8401U
3
Select a station.
Frequency adjustment
[]] (TUNE): Lower
[[] (TUNE): Higher
Note: Hold down for 0.5 sec. or more and release
for station search.
Preset station selection
[{] (P·SET: Preset): Lower preset number
[}] (P·SET: Preset): Higher preset number
Note: Direct selection can be executed with [1] to
[6] buttons on remote control.
Frequency
Indicates the intensity of
the radio wave.
SRC CQ-C8401U
Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.
Preset stations can be simply called up by pressing [}]
(P·SET) or [{] (P·SET).
Notes:
¡ Direct selection can be executed with [1] to [6] but-
tons on remote control.
¡ You can switch between 6 and 18 for FM presetting
stations.
¡ Preset stations are changeable.
Auto Preset Memory (APM)
Stations with good receiving conditions automatically
preset.
1
Select a band.
CQ-C8401U
2
Hold down
[BAND] (APM)
for 2 sec. or
more.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the sta-
tions (SCAN). To stop scanning, press [}] or [{].
Note: New stations overwrite existing saved stations.
1
Press [MENU] to display the menu dis-
play.
For using the remote
CQ-C8401U
control, hold down
[SEL](MENU) for 2
sec. or more.
2
Press [ } ] or [ { ] to select a mode to be
adjusted.
3
Press [BAND]
(SET) to adjust.
CQ-C8401U
4
Press [MENU] to confirm the adjust-
ment.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
CQ-C8401U/C8301U/C7401U/C7301U
Manual station preset
1
Tune in to a station.
2
Hold down or for 2 sec. or
[}] [{]
more.
3
Select a preset number by pressing
[}]
or .
[{]
4
Preset the station by holding down
[}]
or for 2 sec. or more.
[{]
Frequency/preset number blinks once.
Notes:
¡ New stations overwrite existing saved stations.
¡ In step 2, a station can be registered by holding down
the numeric button [1] to [6] for 2 sec. or more.
¡ To stop presetting stations, press [DISP] (Display).
AUTO PRESET
Preset range for FM bands
: Individual setting for FM1-3 each
: Setting of FM1-3 together
PRESET EDIT
Replacement of preset station
[}] [{] : Selection
[BAND]
: Locked
21