Powering The Camcorder On / Off; Auto Power On/Off; Manual Power On/Off And Reset; Manual Power On - HP f558 User Manual

Hide thumbs Also See for f558:

Table of Contents

2.5 Powering the Camcorder On / Off

Once the vehicle engine is started, the camcorder automatically turns on.

If the Automatic Record function is enabled, the recording will

automatically start right after the camcorder turns on.

Please refer to Set Automatic Record (2.6.2)

2.5.2.1

Push the power switch and make sure that the power switch locks on the

memory card slot.

2.5.2.2

Push the power switch and make sure that the memory slot is released

and the camcorder starts power off sequence. Do not power on the

camcorder when it is in the power-off sequence, or the recorded file may

become corrupt.

2.5.2.3

In case the camcorder fails to function normally due to unknown causes,

push the power switch and verify the memory card is in the removable

state; wait for 7 seconds and push the power switch again to restart the

camcorder.

Off

Table of Contents