Panasonic AG-HVX200AP Operating Instructions Manual page 56

Using scene files (continued)
6
The screen below is displayed, so set the
file name of six letters using
button.
Set the same as user information. (Page 61)
• Characters that can be set
Space, A to Z, 0 to 9, : ; < = > ? @ [ \ ] ^_-./
If the COUNTER RESET button is pressed
when the filename has been set, the
characters are cleared.
7
After you finish setting the filename, press
the MENU button.
• The name change will not be completed
unless you have finished step 10.
8
Press button to select SAVE/INIT.
9
Press button, and use
YES. Press
56
, ,
button to select
button.
10
The following screen appears, select YES,
or then press
(To return to the menu level above, press the
MENU button.)
The message below appears, and the changes
to the scene file are complete.
11
Press MENU twice to exit the menus.
• The original scene file settings will be restored
when the power is turned off if SAVE has not
been selected.
• To return the scene file settings to the factory
settings, select INITIAL in step 9, then do steps
10 to 11.
button.