Remote Rack Sensor Operation And Rack View Setup; Figure 133 Remote Sensor Setup, Page 1 Of 1 - Emerson Liebert CRV User Manual

13.8

Remote Rack Sensor Operation and Rack View Setup

Figure 133 Remote Sensor Setup, page 1 of 1

Once the remote rack sensors have been configured and plugged into the CANbus network, the
control can be configured to use the sensor for either control or reference. If the sensor is set to
Disable, it will be ignored. The sensor node number corresponds to the DIP switch assignment of the
sensor.
® ™
Liebert CRV 152
Remote Rack Sensor Wiring