Cleaning The Milk System; Cleaning The Milk System Manually; Rinsing The Milk System - Siemens CT636LE SERIES Instruction Manual

Hide thumbs Also See for CT636LE SERIES:
Table of Contents

Advertisement

Available languages

Available languages

F
Important: If the appliance is not
used for a lengthy period (eg
while you are on holiday), clean
the entire appliance thoroughly,
including the milk system, the ground
coffee drawer and the brewing unit
before use

Cleaning the milk system

The milk system is automatically cleaned
with a short jet of steam directly after pre-
paring a milk drink
F
Tip: For particularly thorough clean-
ing, the milk system can be addi-
tionally rinsed with water (see the
section "Rinsing the milk system").
Important: Clean the milk system
manually every week and, if
required, also more often (see the
section "Cleaning the milk system
manually")
B
Risk of burns!
The beverage outlet gets very hot
After use, always let it cool down
before you touch it

Rinsing the milk system

■ Press button E and select
"Rinse milk system" with the rotary
selector
■ Press C to start the
programme
■ Open door and remove suction pipe from
the milk tube
■ Wipe the suction pipe and insert the end
of the suction pipe into the hole on the
coffee grounds container
■ Close the door Be careful not to jam the
milk tube
Care and daily cleaning
■ Place an empty glass underneath the
beverage outlet
■ Press button C
The milk system is rinsed with water
■ Then empty the glass
■ Press E to exit the program

Cleaning the milk system manually

Take the milk system apart to clean it:
■ Push the beverage outlet down com-
pletely and pull the cover forward to
remove
■ Press the snap lever to the left of the
beverage outlet downwards and pull the
beverage outlet forward
■ Remove the milk tube. Dismantle the
top and bottom sections of the beverage
outlet
en
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents