Formatting A Card; Protecting Files On A Card; Writing The Printing Data On A Card (Dpof Setting) - Panasonic Palmcorder PV-GS320 Operating Instructions Manual

ª
Deleting still picture files recorded on
a card by other equipment
≥A still picture file (other than JPEG) that cannot
be played back on the Camcorder may be
deleted.
Note:
To delete multiple files on the SD Card (selected
files) connect to a PC and use the SD Drive
feature.

Formatting a card

Please be aware that if a card is formatted, then
all the data recorded on the card will be erased.
Store important data on a personal computer, etc.
≥Set to Card Playback Mode.
1
Set [ADVANCED] >> [FORMAT CARD] >>
[YES].
2
When the confirmation message appears,
select [YES] and press the joystick in order
to format the card.
≥In order to stop formatting, select [NO].
≥Normally, it is not necessary to format the card.
If a message appears even though you insert
and remove the card several times, format it.
≥If the SD Card is formatted on other equipment,
it may take longer to record or you may not be
able to use the SD Card. In this case, format the
SD Card on this unit.
(Do not format it on a PC etc.)
≥This unit supports SD Memory Cards formatted
in FAT12 system and FAT16 system based on
SD Memory Card Specifications and SDHC
Memory Cards formatted in FAT32 system.

Protecting files on a card

Files recorded on a card can be protected so that
they may not be deleted by mistake. (Even if the
files are protected, they will be deleted if the card
is formatted.)
≥Set to Card Playback Mode.
1
Set [BASIC] >> [PROTECT] >> [YES].
2
Move the joystick to select a file to be
protected and then press it.
1
46
LSQT1091
Playback mode
≥The [
selected file is protected. Press the joystick
again and the protection is canceled.
≥2 or more files can be protected in
succession.
ª
To complete the settings
Press the [MENU] button.
Writing the printing data on a card
(DPOF setting)
You can write the data of pictures to be printed,
number of prints and other information (DPOF
data) onto the card.
≥Set to Card Playback Mode.
1
Set [ADVANCED] >> [DPOF SET] >> [SET].
2
Move the joystick to select a file to be set
and then press it.
≥The number of prints 1 set to be in DPOF is
displayed.
3
Move the joystick up or down in order to
select the number of prints and then press
it.
≥You can select from 0 to 999. (The number of
pictures to be printed can be set for a printer
supporting DPOF.)
≥2 or more files can be set in succession.
ª
To complete the settings
Press the [MENU] button.
≥DPOF settings made on another Camcorder
may not be recognized by this Camcorder.
Please perform the DPOF settings on your
Camcorder.
ª
To set so that all pictures are not
printed
Select [CANCEL ALL] in Step 1.
ª What is DPOF?
DPOF stands for Digital Print Order Format. This
enables the printing information to be added to
the pictures on the card so that it can be used on
a system supporting DPOF.
] Indication 1 appears and the
1