Recording Check; Blank Search Function; Recording Still Pictures On A Card While Recording Image Onto A Tape - Panasonic Palmcorder PV-GS320 Operating Instructions Manual

≥When connected with the USB cable or the
DV cable to a personal computer or other
equipment
≥When in PC Connection Mode

Recording check

The last image recorded is played back for 2 to
3 seconds. After checking, the Camcorder will be
set to a recording pause.
≥ Set to Tape Recording Mode.
1
Press the joystick to display the icon during
the recording pause. Move the joystick
down until icon 1 appears.
2
Move the joystick left to select the
recording check icon [
≥The [RECORDING CHECK STARTED]
indication appears on the screen of the
Camcorder.

Blank search function

Searches for the last part of the image recorded
(unused part of the tape). After the search is
finished, the blank search function is canceled
and the Camcorder is put into recording pause.
≥ Set to Tape Recording Mode.
1
Press the joystick to display the icon during
the recording pause. Move the joystick
down until icon 1 appears.
2
Move the joystick right to select the blank
search icon [ ].
3
When the confirmation message appears,
select [YES] and press the center of the
joystick.
30
LSQT1091
Record mode
].
1
1
ª Stopping blank search midway
through
Move the joystick down to select the [∫] icon.
≥If the cassette tape has no blank part, then the
Camcorder will stop at the end of the tape.
≥The Camcorder stops at a point approx.
1 second before the end of the last image
recorded. When you start recording at that
point, the image can be recorded seamlessly
from the last image.
Recording still pictures on a card
while recording image onto a tape
You can record still pictures while recording
image onto a tape.
≥ Set to Tape Recording Mode.
1
Press the Photoshot button [
recording image onto a tape.
≥For the number of still pictures that can be
recorded on a card, refer to
≥When recording pictures onto a card, the
recording start/stop button is disabled.
≥You can select the picture quality for still
pictures to be recorded. (
≥In order to record higher quality still pictures,
you must use the card recording mode.
≥When recording still pictures, hold the
Camcorder firmly with your hands and keep
your arms stationary at your side so as not to
shake the Camcorder.
ª Select the size of still pictures to be
recorded on a card in Tape Recording
Mode
1
Set [ADVANCED] >> [PICTURE SIZE] >>
select the desired picture size.
ASPECT [16:9]:
:1280k720
1
:640k360
0.2
] fully while
.
-78-
)
-32-