Using The Lcd Monitor - Panasonic Palmcorder PV-DV53 Operating Instructions Manual

Camera Recording

Using the LCD Monitor

The LCD (Liquid Crystal Display) monitor
can be used while recording.
180°
90°
90°
To adjust the LCD/EVF
BRIGHTNESS or COLOR
1, 5
MENU
2, 3, 4
JOG KEY
EVF/LCD
16
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
1
2
1
LCD-OPEN
3
Note
• Using the LCD monitor will reduce battery
operating time.
• Close the LCD monitor completely when
not in use.
1
2
3
4
5
Press LCD-OPEN to unlock the LCD
monitor.
Swing the LCD monitor fully open
and adjust the viewing angle.
• The LCD monitor will automatically
turn on.
• When the LCD monitor is completely
closed, it will shut off automatically to
save power.
• Adjust the LCD Brightness and/or
color of the LCD monitor if necessary.
Please refer to "To adjust the LCD/
EVF BRIGHTNESS or COLOR"
below.
Start recording.
Press MENU to display the main menu
screen.
Rotate JOG KEY to select
SETUP from the main menu screen.
(Menu OSD: pp. 60, 62)
Press JOG KEY to display the LCD/
EVF SETUP screen.
Press JOG KEY to select LCD
BRIGHTNESS, LCD COLOR, or
EVF BRIGHTNESS, then rotate JOG
KEY to adjust.
Press MENU twice to exit this mode.
LCD/EVF