Using With The Remote Control - Panasonic HDC-HS200 Operating Instructions Manual

Preparation
8
Setup
Select the menu. (l 27)
[SETUP] # [REMOTE CONTROL] # [ON]
≥ This function's default setting is [ON].
≥ [REMOTE CONTROL] can be set to [OFF] so
the remote control will not be mistakenly used
when not in use.
1
2
EXT DISPLAY
3
SEARCH
4
STILL ADV
SKIP
5
6
1 Power on/off button [
Power can be turned on/off when the mode is set
to anything but OFF.
≥ Power cannot be turned on by the power on/off
button when 36 hours have passed after the
power is turned off.
≥ Power cannot be turned off when it is
connected to the PC or the DVD burner.
2 Photoshot button [
3 On-screen display button [EXT DISPLAY]
(l 97)
4 Playback operation buttons (l 76)
These buttons function in the same manner as
the corresponding playback operation icon being
displayed on screen.
[Excluding skip playback (l 76)].
5 Delete button [
6 Direction buttons [3,4,2,1]
7 Zoom/volume/thumbnail display switch
buttons [T, W,
8 Recording start/stop button [START/
*
STOP]
Using with the remote
control
7
START/
STOP
8
/VOL
DATE/TIME 9
PLAY SEARCH
PAUSE
STILL ADV
STOP SKIP
10
MENU
OK
11
]
*
]
*
]
*
/VOL]
9 Date/time button [DATE/TIME] (l 32)
10 Menu button [MENU]
11 OK button [OK]
* means that these buttons function in the same
manner as the corresponding buttons on the
unit.
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer's instructions.
Remove the insulation sheet A before using.
Replace a button-type battery
1 While pressing
the stopper B,
pull out the
battery holder.
2 Set the
button-type
battery with its
(i) mark facing
upward and
then put the
battery holder
back in place.
≥ When the button-type battery runs down,
replace it with a new battery (part number:
CR2025). The battery should normally last
about 1 year, however this depends on how
frequently the unit is used.
*
37
VQT1Y59