Download Print this page

Makita BHS630 Technical Information page 5

Hide thumbs Also See for BHS630:

Advertisement

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Depth Guide
DISASSEMBLING
Depth guide is joined to the Machine at the Handle section, and to Base at Rear angular guide.
Separate Depth guide by disassembling from Handle section and from Rear angular guide as drawn in Fig. 5.
Fig. 5
1. Loosen Lever 55 by turning
toward the direction designated
with arrow.
3. Remove Pipe 6.
Pipe 6
5. Remove M4x20 Hex socket head bolt
and M4-7 Hex lock nut, pulling down
Base to the position in which they can
be easily removed. Now, Depth guide is
disjoined both from the machine
and Rear angular guide.
Rear angular
guide
M4-7 Hex
lock nut
2. Take off Stop ring E-8, and remove M6x85 Hex bolt, by
Lever 55
M5x8 Hex socket head
set screw ( No need to remove completely.)
M4x20 Hex socket
head bolt
employing Lever 55 as a wrench. And remove Flat washer 6.
Now, Depth guide is disjoined from the machine.
Flat washer 6
Lever 55
M6x85
Hex bolt
Stop ring E-8
4. Remove M6 Hex nut, loosening M5x8
Hex socket head set screw.
6. Disassemble Depth guide, and remove two
Collars from the both side of Depth guide.
Depth guide
Base
Pipe 6
M6 Hex nut
Collar
P 5/ 16

Advertisement

loading