LG DKS-3000 Owner's Manual page 8

KD450 WRUSLL ENG-8639
Progressive Scan (For Component Video connections) – Selects whether
the COMPONENT VIDEO OUT/PROGRESSIVE SCAN OUTPUT jacks output
progressive signal. If your TV accepts progressive format signals, you will enjoy
accurate color reproduction and high quality image by selecting [ON]. If your TV
does not accept progressive format signals, select [OFF].
If you set Progressive Scan to [On] in error, you must reset the unit.
First, remove the disc in the unit. Next, press and hold STOP for five seconds.
The video output will be restored to the standard setting, and a picture will be
visible on your TV.
Adjusting the audio settings
Dolby Digital / DTS / MPEG
Bitstream: Select "Bitstream" if you connect the DVD Player's DIGITAL
OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or
MPEG decoder.
PCM : Select when connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be automatically downmixed to
two-channel PCM audio.
- For DTS decoder, audio signals are outputted only when connected
according to Digital connection(through coaxial and optical jacks).
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo. This function is
effective for multi-channel karaoke DVDs only.
Adjusting the lock settings
To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so.
1 Enter a 4-digit password then press ENTER.
2 Enter it again then press ENTER to verify. If you make a mistake while enter-
ing number, press CLEAR then correct it.
If you forget your password you can reset it.
1 Remove the disc in the unit.
2 Press SETUP to display the Setup menu. Input '210499' and press ENTER.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating. For rated discs, make sure to press ENTER
after entering the password to enjoy it.
Password – Sets or changes the password for lock settings.
[New]: Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change]: Enter the new password twice after entering the current password.
Area code – Select a code for a geographic area as the playback rating level.
This determines which area's standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 16.
8
Downloaded From DvDPlayer-Manual.com LG Manuals
1/24/11 7:08 PM Page 8
5.1 Speaker Setup
1 Open the settings menu:
2 Select the audio icon:
3 Select right to enter the audio menu, then
select 5.1 Speaker Setup:
4 Select the speaker you want to adjust:
5 Select a option and change
the settings:
6 Set the output level (volume) of a speaker:
from -5dB to +5dB.
7 If you connect speakers to your unit,
setting the Distance lets the speakers to
know how far the sound has to travel to
reach your set listening point. This allows
the sound from each speaker to reach the
listener at the same time.
8 Test the signals of each speaker:
Adjust the volume to your taste
according to these signals.
9 Save your settings and exit the Setup
menu:
ON REMOTE
SETUP
U U u u
i i U U u u ENTER
I I i i
U U u u I I i i
I I i i
I I i i
I I i i
SETUP
A
D
D
th
S
th
•
•
N
-
-
S
c
S
S
-T