Dismantling Instructions - Philips SW970/17 Service Manual

www.freeservicemanuals.info

DISMANTLING INSTRUCTIONS

Dismantling the Front Assembly
1. Place the Subwoofer Box upside down and use a screw
driver (minus type) to force open the front assembly from
the rear as shown in the Picture 1.
2. To service/replace the rotary potmeter on the front, the
Port Edge (pos. 10) which is glued to the Front Cabinet
(pos. 2) must be forced open.
Caution: Do not break the bundle of wires to the front.
Picture 1
Picture 2
08/06/2012
2
Dismantling the Rear Assembly
1. Unscrew 10 screws A (see Picture 3) to pull out the pc
board assembly.
Caution: Do not break the bundle of wires to the front .
Dismantling the Speaker Driver
1. Loosen the Speaker Grille (pos. 40) as shown in the
Picture 2.
2. Unscrew 4 screws B (see Picture 4) to remove the
Speaker Driver (pos. 13).
World of Free Manuals