Sprout Shuts Down Unexpectedly; Display Problems; The Display Is Blank; Images On The Screen Are Too Large Or Too Small, Or The Images Are Fuzzy - HP Sprout User Manual

Sprout shuts down unexpectedly

Sprout might be in an exceedingly hot environment. Turn it off and let it cool down.
●
Be sure that Sprout vents are not blocked and that the internal fan is running. See
●
Sprout on page 1

Display problems

The display is blank

Exit Sleep to redisplay the screen image.
●
Press the power button briefly.
◦
Press a key on the keyboard.
◦
Press the space bar.
◦
Press the
◦
Press the power button to turn on Sprout.
●

Images on the screen are too large or too small, or the images are fuzzy

Adjust the resolution settings.
1. Type control panel in the taskbar search box, and then select Control Panel.
2. Select Appearance and Personalization.
3. Under Display, select Adjust Screen Resolution.
4. Adjust resolution as necessary, and then select Apply.

Keyboard and mouse problems

Be sure that you are using the keyboard or mouse within range of the receiver.
●
Be sure that the mouse is not in Suspend mode, which occurs after 20 minutes of inactivity. Click the left
●
mouse button to reactivate it.
Replace the batteries in the keyboard and mouse.
●
Re-pair the keyboard and mouse to the receiver.
●
NOTE:
IMPORTANT:
To re-pair the keyboard and mouse:
1. Be sure that the mouse is on (1), and then press and hold the Connect button (2) for 5 to 10 seconds. To
confirm the connection, move the mouse and check for a response on the screen.
2. After the mouse connection is established, complete the following steps to re-pair the keyboard.
3. On the keyboard, press and hold the Connect button (3) for 5 to 10 seconds.
36 Chapter 9 Troubleshooting
for the location of the computer vents.
esc key.
The illustrations below may look slightly different from your keyboard and mouse.
During these steps, place the keyboard and mouse on the same level as the receiver.
Getting to know your