Page 2
01 dicodes Dani Extreme V2+ is an electronically controlled MOD to be used Dani Extreme V2+ with various atomizers of different sizes and diameter. It is offered in three different sizes and prepared to use one Li-Ion battery of size 18350, 18500 or 18650.
03 Display Operation The MOD is equipped with a graphical OLED display which provides all important informations about the status during the vape and/or for 4 seconds after each vape (see display mode setting). Temperature controlled mode (TC-mode): Battery-voltage during Temperature during the vape the vape (including voltage Other modes: battery symbol...
Page 4
05 Main Menu (Page 1) Power Up Power Down Power Up increases the power to the Power-Limit value and then rolls over to 5W. Power Down decreases the power down to 5W and then rolls over to the Power-Lim value. The Power-Limit value is adjusted in the Extended Functions Sub-Menu “Heater” and provides a protection feature for atomizers which are not prepared for high wattage or to reduce the power range intentionally.
Page 5
When Hctrl is set to 1, the menu directly jumps to the selection of the wire type. Here the user can select between dicodes-wire (NiFe30), Nickel 200, Titan, Tungsten (Wolfram), Stainless Stell (Inox) and “Other”. With “Other” selected, the temperature coefficient defined in the Extended Functions Menu under item “Tmp.
Page 6
For a graphical diagram showing the boost operation options, please refer to the document “Explanations refering to the Power Boost on dicodes mods” or have a look to the manual of model Tiny.
Page 7
05 Main Menu (Page 4) Switch Off Device Beside the Auto-Power-Off feature, the user can actively switch off the device. It is recommended to switch the device off or to wait for auto-power-off, before the battery is replaced, because then the statistic counters (see below) are saved. Otherwise the changes since the last power up are lost.
Page 8
(*1 ) The temperature coefficient selects the type of wire material, range 100 to 650: When TC-mode is selected (Main menu HCtrl=1), the user must select the wire type to be NiFe30 (dicodes wire), Ni200, Titanium, Tungsten (Wolfram), Stainless Steel (Inox) or “Other”. The value for “Other” is adjusted here. The values of the predefined wire-types are 320=dicodes-wire, 620=Nickel, about 105=Stainless Steel, 350=Titanium (varying literature values, danger: fire harzard), 440=Tungsten (Wolfram).
Page 9
- Power Limit sets the power during the boost-phase in the Power Boost Mode. All dicodes devices have a functionality to adjust the minimum discharge level of the battery between 2.5V and 3.0V (older models 3.5V). Almost all available batteries on the market specify the minmum discharge level of 2.5V to 2.7V.
Page 10
06 Extended Functions Menu 06 Extended Functions Menu Weitere Erläuterungen zu einzelnen Punkten im Extended Functions Menü Seite 2 Additional Explanation to several menu items, page 2 The display mode switches on and off the dynamic display of several parameters during the vape.
Page 11
06 Extended Functions Menu 06 Extended Functions Menu 06 Extended Functions Menu Weitere Erläuterungen zu einzelnen Punkten im Extended Functions Menü Seite 3 Weitere Erläuterungen zu einzelnen Punkten im Extended Functions Menü Seite 2 Additional Explanation to several menu items, page 3 The Extended Functions Menu has another sub-menu showing several statistical values.
Page 12
GmbH dicodes Friedrich der Große 70 D-44628 Herne Germany Phone: +49 2323 1463635 Email: info@dicodes-mods.de Web: www.dicodes-mods.de Errors excepted. Subject to changes without prior notice. c copyrights dicodes GmbH, Germany, no unauthorized reprint. 10.09.2015 dicodes DaniV2plus manual, ENG, revision 1...
Need help?
Do you have a question about the Dani Extreme V2+ and is the answer not in the manual?
Questions and answers