Table of Contents
Advertisement
•PAGE LEFT key, PAGE RIGHT key
In Performance mode, these keys allow you to select
programs by category.--> p.9
These keys switch between the pages that appear in the
display in Define and Edit modes. Press the PAGE RIGHT
key to move to the page to the right. Press the PAGE LEFT
key to move to the page to the left. --> p.20
1.1 Front panel
•Display
In Performance mode, this 40 character x 2 line
LCD display shows the name of the currently
selected sound or performance editor settings.
In Define and Edit modes it displays para-
meters. --> p.8, 11, 21, 22
•Knobs 1-5
In Performance mode, these knobs
adjust the value of the parameter
assigned to each knob, allowing you to
control the sound as you play. --> p.ll
In Define and Edit modes, these knobs
move the cursor and modify parameter
values. --> p.21
•CURSOR <key, CURSOR> k e y - - - - - - - - - - - - - . . . ,
In Performance mode, simultaneously pressing both of
these keys will enter Demonstratin Playback mode. --> p.7
These keys select from up to 5 parameters or menu items
that appear in each page in Define and Edit modes.--> p.21
ARPEGGIATOR
•ARPEGGIO ON/OFF key
.PATTERN DEFINE key
•OCTAVE key
•LATCH/KEY SYNC key
•SPEED
These are the controls for the arpeggiator; on/ off, etc.
--> p.15
•VOLUME
This knob adjusts the overall volume of the Prophecy.
This simultaneously adjusts the volume from the
OUTPUT jacks (rear panel) and from the PHONES jack.
--> p.6
•WHEEL 3 HOLD key
Pressing this key while operating WHEEL 3 will hold the
effect where it is at that moment. The effect will be held
even if you return WHEEL 3 to its original position. An
LED will light while the Hold function is on. Press the key
again to turn it off. If Hold is on and you move WHEEL 3
through the location where the HOLD key was pressed,
Hold will be defeated automatically.--> p.13
•PORTAMENTO key
This key turns portamento. on/ off.
When Portamento is on, the switch LED will light.--> p.10
•OCTAVE UP key
•OCTAVE DOWN key
These keys shift the range of the keyboard in 1-octave
increments.--> p.IO
2
The operations and functions of the Prophecy such as selecting a
Program or editing a Performance, Arpeggiator setting, or Edit
Program are grouped broadly into modes; Performance mode,
the Define modes (Performance Editor Define and Pattern
Define), and Edit mode. For details refer to page 18.
•RIBBON
(ribbon controller)
This is a multi-assignable controller.
By moving your finger on the con-
troller to the left or right, or by pressing
down, you can control assigned para-
meters such as pitch or modulation.
--> p.13
•PHONES jack
A set of headphones can be
connected to this stereo mini-jack.
•WHEEL 1, WHEEL2, WHEEL3
(control wheel1 ,2,3)
These are assignable wheel controllers. By
rotating the wheel you can control assigned
parameters such as pitch or modulation.
--> p.12, 13
Advertisement
Table of Contents
