Connecting To An Amplifier; Connecting Audio Cable; Connecting Coaxial (Digital Audio) Cable - LG DP520 Owner's Manual

Connecting to an
Amplifier

Connecting Audio cable

Connect the AUDIO OUTPUT on the unit to 2CH
AUDIO IN on amplifier with Audio cable, such as
AUDIO Left/Right with white/red.
Downloaded From DvDPlayer-Manual.com LG Manuals
DP522-P.BROMLLK-1242-ENG.indd 11
Rear of the Unit
Audio Cable
Receiver / Amplifier
Connecting COAXIAL (digital
audio) cable
Connect one of the unit's DIGITAL AUDIO OUTPUT
(COAXIAL) jacks to the corresponding jack on your
amplifier.
Coaxial Cable
Receiver / Amplifier
OPTICAL
y If your TV is not capable of handling 96 kHz
sampling frequency, set the [Sample Freq.]
option to [48 kHz] on the setup menu.
y If your TV is not equipped with Dolby Digital
and MPEG decoder, set the [Dolby Digital] and
[MPEG] options to [PCM] on the setup menu.
,
Note
y If the audio format of the digital output
does not match the capabilities of your
amplifier, the amplifier will produce a strong,
distorted sound or no sound at all.
y To see the audio format of the current disc
in the on-screen display, press AUDIO.
y This unit does not perform internal (2
channel) decoding of a DTS sound track.
To enjoy DTS multi channel surround, you
must connect this unit to a DTS compatible
amplifier via one of this unit's digital audio
outputs.
Connecting 11
2
Rear of the Unit
2012-01-31 12:02:01