Programmable settings
You can customize the unit by programming the following features.
To access the features, there are 2 methods:
– scrolling through the display menus (page 25)
– using the direct commands (page 28)
L Mainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
: Base unit / Y Handset
1
{MENU}
2
Proceed with the operation for your unit.
Base unit: Press {V}, {^}, {7}, or {8} to select the desired main menu. i {SELECT}
Handset: Press {V}, {^}, {<}, or {>} to select the desired menu. i {SELECT}
3
Press {V} or {^} to select the desired item in sub-menu 1. i {SELECT}
L In some cases, you may need to select from sub-menu 2. i {SELECT}
4
Press {V} or {^} to select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {■}(EXIT) on the base unit or {OFF} on the handset.
Note:
L See page 28 for the default settings.
Base unit
Main menu
View Caller ID
Phonebook
Set answering
Sub-menu 1
Record greeting
Play greeting
Ring count
Recording time
Remote code
Call screening
For assistance, please visit http://www.panasonic.com/help
Sub-menu 2
–
–
Line1&Line2
Line1
Line2
Line1&Line2
Line1
Line2
*1
*1
*1
Programming
Page
–
33
–
22
36
37
–
41
–
41
–
39
–
36
25