Setting Up The Handset - Panasonic KX-TG5671 Operating Instructions Manual

Preparation

Setting up the handset

Connecting the charger
Available model:
KX-TG5672/KX-TG5673
L Use only the included Panasonic AC
adaptor KX-TCA1 or PQLV256.
(120 V AC, 60 Hz)
Bottom of the charger
Fasten the AC adaptor cord to prevent
it from being disconnected.
12
For assistance, please visit http://www.panasonic.com/phonehelp
Battery installation/replacement
1
Press the notch of the handset cover
firmly, and slide it in the direction of the
arrow.
L If necessary, remove the old battery.
2
Insert the battery (A), and press it
down until it snaps into position (B).
Then close the handset cover.
Hooks
Important:
L Use only the rechargeable Panasonic
battery noted on page 7.
B
A