Panasonic KX-TEM824 User Manual page 61

To change to a 5-party conference call during a 3-party conference call with one or 2 outside
parties
PT
During a 3-party conference call with one or 2 outside parties
2
Enter 22 .
Press HOLD.
The current call is placed
on hold in the parking zone
automatically.
Press CONF.
To disconnect a 5-party conference call
PT
At the original extension
On-hook.
• Only one 5-party conference call can be in progress at a time.
• You cannot change to a 5-party conference call during a 3-party conference call among 3
extensions.
• If a parked call is not retrieved within 5 minutes while you are trying to establish a
5–party conference call, you will hear a ring tone. If you are having a conversation with
another party at that time, you will hear an alarm tone.
• If you hear a busy tone after dialling the desired phone number or if you dial a wrong
phone number, press the FLASH/RECALL button to retry.
• If you want to talk to the other 2 parties on hold again before the fourth party
answers, first go on-hook, then follow the Call Park Retrieve procedure and press the
CONF button to retrieve each of the held calls.
• 3.1.3 Customising the Buttons
Create or edit a Conference button.
2
For an outside phone number, press the CO
button or seize an outside (CO) line before
dialling the phone number.
C.Tone
(Optional)
A 5-party conference call
is now established.
To continue
desired
phone no.
Dial desired
phone number.
Talk.
1.4 During a Conversation
Talk.
Press CONF.
The current call is placed
on hold in the parking zone
automatically.
User Manual 61