Panasonic KX-TEM824 User Manual page 123

• * 1 Year (00–99), Month (01–12), Day (01–31), Day of the week (0–6: Sun-Sat), Hour (01–
12), Minute (00–59), AM/PM (0/1)
2
• * The preprogrammed extension password can be used for the Walking COS feature and
the Remote Extension Lock Feature. Each extension's password must be unique.
3
• * You can enter the system password instead of the password of the extension connected
to extension jack 01 (manager password). Ask your administrator or dealer for the
manager password or system password.
4
• * Extension numbers are displayed in the order of the jack numbers when you press the
SP-PHONE (NEXT) or REDIAL (PREV) button.
• * 5 Up to 32 messages (DISA/UCD: max. 8, 3-level AA: max. 24) can be recorded. The total
recording time is 3 minutes. When an optional message expansion card for DISA/UCD
OGMs is added, the total recording time of the PBX is increased to 6 minutes. When the
total time of all recordings becomes 3 (or 6) minutes or more, the PBX automatically stops
recording. Record messages using the handset (not the Hands-free microphone), to
reduce background noise.
• * 6 Before entering "9", go off-hook.
7
• * "Delete Complete" is shown on a display proprietary telephone (PT). While this
message is shown, you can enter "0", "1", or "2", to erase, record, or play any OGMs for
DISA/UCD.
8
• * The message is played back.
• * 9 While the message is being played back, you can enter "0", "1", or "2", to erase, record,
or play any OGMs for DISA/UCD, or press the SP-PHONE (NEXT) or REDIAL (PREV)
button to start playing other OGMs for DISA/UCD. To exit programming mode after the
message has played, press the HOLD button and then the PROGRAM button, or go off-
hook and then on-hook.
10
• * While the message is being played back, you can enter "3" or "4", to record or play any
OGMs for 3-level AA, or press the SP-PHONE (NEXT) or REDIAL (PREV) button to start
playing other OGMs for 3-level AA. To exit programming mode after the message has
played, press the HOLD button and then the PROGRAM button, or go off-hook and then
on-hook.
2.1 Control Features
User Manual 123