Download  Print this page

Advertisement

Screen issue
Screen colour is inconsistent.
White does not really look white.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product will turn off automatically.
Picture quality of the product is different from the dealer
shop where it was purchased.
The screen display does not look normal.
The brightness and colour do not look normal.
Broken lines are displayed on the edges of the screen.
Lines (red, green or blue) are displayed on the screen.
Go to
Picture
and adjust the
Colour Space
Picture
White Balance
Go to
and adjust the
The product is in power-saving mode.
Press any key on the keyboard or move the mouse to return to the previous screen.
Go to
System
and make sure
Sleep Timer
If a PC is connected to the product, check the power status of the PC.
Make sure the power cable is connected properly to the product and power outlet.
If the signal from a connected device is not detected, the product automatically turns off after 10 to 15
minutes.
Use an HDMI cable to obtain high-definition (HD) picture quality.
Encoded video content may cause the display to appear corrupted in scenes featuring fast moving
objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does not mean
the product is defective.
A cell phone within a distance of one-meter radius may cause static on analogue and digital products.
Picture
Go to
and adjust the screen settings such as
Sharpness.
Go to
System
and adjust the
Energy Saving
Reset the screen settings to the default settings.
Picture Size
Screen
Fit, change the setting to 16:9.
If
is set to
These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor. Contact a
Samsung Service Centre to resolve the issue.
settings.
settings.
is set to Off.
Picture
Mode, Colour,
Brightness
settings.
and
153

Advertisement

Table of Contents

   Also See for Samsung OH24E

This manual is also suitable for:

Om24e

Comments to this Manuals

Symbols: 0
Latest comments: