Download  Print this page

Screen Mirroring; Server Network Settings; Connect To Server; Magicinfo Mode - Samsung OH24E User Manual

Hide thumbs

Advertisement

Screen Mirroring

MENU m →
Network
Screen Mirroring
Press SOURCE on the remote control.
• SOURCE →
Source
Screen Mirroring
Connect a mobile device that supports the mirroring function to the product. This allows the screen and
sound from the mobile device to be outputted on the product. Mirroring refers to outputting the screen
and sound from a mobile device on a display device.
― To use
Screen
Mirroring, make sure the mobile device supports the mirroring function such as
AllShare Cast, WiDi (version 3.5 or higher) and Miracast. To check if the mirroring function is available,
visit the mobile device manufacturer website.
― Screen or sound output may be choppy if there is network congestion.
― Model OM24E is only supported.
Screen Mirroring
Run the mirroring function from the mobile device. The mobile device automatically searches and
displays the product in a list.
― If the mobile device cannot connect to the product, turn them off and then on again, and try again.
→ ENTER E

Server Network Settings

MENU m →
Network
Server Network Settings

Connect to server

Player
To run
connect to a network.
Server Address
SSL
Port
/
/
― If the
SSL
option is enabled, the server is configured to use https and data transfer is encrypted.
― Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to
the server using port number 7001, check with your server administrator to find the correct port
number and then change the port number.)

MagicInfo Mode

MagicInfo Mode
Select the appropriate
depending on the environment where you are using the
product.
Lite
Premium
/

Server Access

Select a method to connect the server network.
Allow
/
Deny

FTP Mode

Specify the FTP operating mode.
Active
/
Passive
→ ENTER E
114

Advertisement

Table of Contents

   Also See for Samsung OH24E

This manual is also suitable for:

Om24e

Comments to this Manuals

Symbols: 0
Latest comments: