1080 Io Board, Dc-In Cable - Lenovo U31-70 Hardware Maintenance Manual

U31-70 Hardware Maintenance Manual

1080 IO board, DC-in cable

For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 34
• "1070 Fan assembly and Heat Sink assembly" on page 42
Figure 8. Removal steps of IO board, DC-in cable
Detach the IO board connector in the directions shown by arrows 1 and 2.
Remove the screw 3.
When installing: Make sure that the connector is attached firmly.
46
Step Screw (quantity)
M2 × 2.5 mm, Phillips-head, nylok-coated (1)
3
io board---log up
Color Torque
Silver 1.0~1.5 kgf*cm