U31-70 Hardware Maintenance Manual
1060 Hard disk drive
For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 34
• "1050 Speakers" on page 39
Figure 6. Removal steps of hard disk drive
Remove the screws 1.
40
Attention:
• Do not drop the hard disk drive or apply any physical shock to it. The hard
disk drive is sensitive to physical shock. Improper handling can cause damage and
permanent loss of data.
• Before removing the drive, suggest the customer to backup all the information on
it if possible.
• Never remove the drive while the system is operating or in suspend mode.
Step
Screw (quantity)
M2 × 4 mm, Phillips-head, nylok-coated (4)
1
hdd bracket---log up
Color
Torque
Black
1.0~1.5 kgf*cm