Sensor Reheat - Panasonic NN-CD997S User Manual

Sensor reheat

Sensor reheat:
This feature allows you to reheat precooked room
temperature or refrigerator temperature food without
selecting time and power.
The oven does it automatically.
1
Press.
2
Press.
After the burst of steam is
detected by SENSOR,
the remaining reheating time
appears in the display and
begins to count down.
For best results on Sensor reheat, follow these
recommendations:
. All food must be previously cooked and must be
at room temperature or refrigerator temperature.
2. Food should always be covered loosely but
completely with plastic wrap or casserole lid
which does not seal. (Do not use any snap
closing lids.)
3. Food weighing less than 00 g or more than  kg
should be reheated by power and time only.
dO nOt:
. Reheat bread and pastry products. Use manual
power and time.
2. Reheat raw or uncooked food.
3. Use reheat if oven cavity is warm.
4. Use reheat for beverages.
5. Use reheat for frozen foods.
More/less Pad: (Sensor reheat/Sensor cook
/Weight cook/auto cook)
Preferences for food doneness vary with each
individual. After having used Sensor Reheat/Cook,
Auto Cook and Weight Cook a few times, you may
decide you would prefer your food cooked to a
different doneness. By using the More/Less Pad,
the programs can be adjusted to cook food for a
longer or shorter time. Press More/Less Pad before
pressing Start Pad.
 tap = More
2 taps = Less
3 taps = Original setting
If you are satisfied with the result of the Auto Sensor/
Cook program, you don't have to use this pad.
nOtES: (Sensor reheat/Sensor cook)
. Auto Sensor system works by detecting a build-up
of steam on the sensor. All food cooked using the
Auto Sensor should be covered with a securely
fitted lid or plastic wrap. Do not pierce holes in
plastic wrap. As food is cooked in a microwave
oven, steam is produced. After the burst of steam
escapes from under the food covering and is
detected by SENSOR, a two-beep signal is
heard and the oven automatically calculates the
remaining cooking time, which counts down in the
display window.
2. When a Sensor Reheat/Cook Category is
selected, the oven door should not be opened for
longer than one minutes. Opening the door may
cause inaccurate cooking results. The oven door
may be opened to stir, turn or add food when the
cooking time begins to count down in the display
window.
3. The room air temperature surrounding the oven
should not be above 35˚C when using the Sensor
Reheat/Cook feature.
4. Food less than 00 g should be cooked by micro
power and time only, not by Sensor Reheat/Cook.
5. When the remaining cooking time is over
60 minutes, the time will appear as hours and
minutes.
6. All food for Sensor Reheat/Cook should be taken
from their normal storage place.
7. Before using the Sensor Reheat/Cook feature
make sure Ceramic Tray in the oven is dry to
assure the best results.
8. Stand time or a power level can be programmed
after Sensor Reheat/Cook is set.
9. If the oven has previously been used on Grill
Convection or Combination, and it is too hot to
be used on an Auto Sensor Program, "HOT" will
appear in the display window. After the "HOT"
disappears, the Sensor Programs may be used.
If in a hurry, cook food manually with selecting
the correct Microwave power and cooking time
yourself.
- En- -