Storing Names And Telephone Numbers Into Navigator Directory - Panasonic KX-FHD332 Operating Instructions Manual

Storing names and telephone numbers into
navigator directory
For rapid access to frequently dialed numbers, the unit provides the navigator directory (100 entries).
{<}{>}
{FLASH}
(Hyphen)
1
Press {MENU} repeatedly until the
following is displayed.
2
Press {>}.
3
Enter the name, up to 10 characters (see
page 32 for instructions).
Example:
4
Press {SET}.
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
L If you want to enter a hyphen, press
{FLASH}.
{MENU}
{SET}
{STOP}
(Delete)
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.
NAME=
STORE:PRESS SET
NAME=ALICE
STORE:PRESS SET
NO.=
NO.=5552233
Automatic Dialing
6
Press {SET}.
L To program other entries, repeat steps 3
to 6.
7
Press {MENU} to exit the program.
Helpful hint:
L For your convenience, HELP-FAX (1-800-
435-7329) has been pre-programmed. If you
cannot solve a problem, call using this entry
(page 38). If unnecessary, you can erase it
(page 37).
L You can confirm the stored entries in the
telephone number list (page 79).
Note:
L When the following is displayed in step 6, you
can store only 5 more entries.
L If there is no space to store new entries, the
following is displayed in step 6. Erase
unnecessary entries (page 37).
L A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character/number, and then make the
correction.
To delete a character/number
Press {<} or {>} to move the cursor to the
character/number you want to delete, and press
{STOP}.
REGISTERED
u
NAME=
STORE:PRESS SET
REGISTERED
SPACE= 5 DIRS.
REGISTERED
DIRECTORY FULL
35