Freezer Leveling And Door Closing - Whirlpool WZF56R16DW User Manual

Door Removal &
Replacement
Top Hinge
B
A. Top Hinge Cover
B. / " Hex-Head Hinge Screws
5
16
C. Top Hinge
Bottom Hinge
B
A. Hinge Pin
B. / " Hex-Head Hinge Screws
3
8

Freezer Leveling and Door Closing

Style 1—without Grille
1. Locate the 2 front leveling legs taped among the packing
materials.
2. Screw these legs into the front holes on the bottom of the
freezer. The back of the freezer rests on 2 fixed supports.
3. Adjust the front legs enough to lift the cabinet up off the floor.
4. Place a leveling tool on top of the freezer
first side to side, then front to back. Turn leg
counterclockwise to raise a corner. Turn leg
clockwise to lower a corner.
5. Repeat Step 4 until freezer is level.
6. After freezer is fully loaded with food,
recheck with level as in Step 4.
Door Swing Reversal and Handle Removal (optional)
A
A. Cabinet Hinge Hole Plugs
A
B
C
A
A
A. Grommet
B. Handle
C. Setscrews
A
A. Hinge Pin
B. / " Hex-Head Hinge Screws
3
8
2
1
B
C
3
B
Style 2—with Grille
Your freezer has 2 front adjustable legs — one on each side. The
back of the freezer rests on 2 fixed rollers. The base grille covers
the adjustable brake feet and roller assemblies located at the
bottom of the freezer below the freezer door. Before making any
adjustments, remove the base grille and move the freezer to its
final location.
Tools Needed: ¹⁄
" hex driver, Phillips head screwdriver
4
1. Remove the base grille screws. Grasp the grille firmly and pull
it toward you. Open the freezer door to access the brake feet.
NOTE: To allow the freezer to roll more easily, raise the brake
feet by turning them counterclockwise. The front rollers will be
touching the floor.
6