4-14 COOLING SYSTEM
Radiator, Radiator Fan
Radiator Fan Connector [A]
Radiator Fan Bolts [A]
Radiator Fan [B]
Do not touch the radiator core. This could damage
the radiator fins, resulting in loss of cooling effi-
Radiator Fan Installation
Tighten the radiator fan bolts.
Torque - Radiator Fan Bolts: 8.3 N·m (0.85 kgf·m, 73 in·lb)
Fit the radiator stopper [A] into the grommet [B].
Torque - Radiator Hose Clamp Screws: 2.0 N·m (0.20 kgf·m,
Radiator Screen Screws: 6.9 N·m (0.70 kgf·m, 61
Check the radiator core.
If there are obstructions to air flow, remove them.
If the corrugated fins [A] are deformed, carefully
If the air passages of the radiator core are blocked more
than 20% by unremovable obstructions or irreparably de-
formed fins, replace the radiator with a new one.
When cleaning the radiator with steam cleaner, be
careful of the following to prevent radiator damage.
Keep the steam gun [A] away more than 0.5 m (1.6 ft)
[B] from the radiator core. Hold the steam gun per-
pendicular [C] (not oblique [D]) to the core surface.
Run the steam gun, following the core fin direction.