SENSOR OPERATING INSTRUCTIONS
Sensor Cook allows you to cook most of your favorite
foods without selecting cooking times and power levels.
The display will indicate Sensing during the initial sensing
The oven automatically determines required cooking time
for each food item. When the internal sensor detects a
certain amount of humidity coming from the food, it will tell
the oven how much longer to heat. The display will show
the remaining heating time. For best results for cooking by
Sensor, follow these recommendations.
1. Food cooked with the sensor system should be at normal
2. Always use microwavable containers.
3. Match the amount to the size of the container.
Fill containers at least half full for best results.
USING SENSOR COOK
Using SENSOR COOK lets you cook common
microwave-prepared foods without needing to
program times and cook powers.
Suppose you want to cook frozen pizza
Sensor Cook selections are made by touching the
Sensor Cook key multiple times.
4. Be sure the outside of the cooking container and the
inside of the microwave oven are dry before placing
food in the oven. Beads of moisture turning into
steam can mislead the sensor.
5. Foods should always be covered with mic
plastic wrap, waxed paper, or a lid. Never use tight-
sealing plastic covers. They can prevent steam from
escaping and cause food to overcook.
6. Do not open the door or touch the STOP key during
the sensing time. When sensing time is over, the
oven beeps and the remaining cooking time will
appear in the display window.
open the door to stir, turn,
USING SENSOR REHEAT
Using SEN SO R REHEAT lets you
microwave-prepared foods without selecting cooking
times and power levels.
Suppose you want to reheat 3 cups beverage.
Sensor Reheat selections are made by touching the
Sensor Reheat key multiple times.
At this time you can
rearrange the food.
Time counting down