Hinge Adjustment - Viking VCFB530 Installation Manual

Hinge Adjustment

5
2
Remove 4 side screws and remove unit top.
7
1
Replace unit top. Replace 4 side screws.
8a
Wall
2 x 4
Refrigerator
Attach a single 2 x 4 to wall stud (refer to dimensions
page for exact location).
56 56
6
Front of unit
1 3
Loosen the 4 hinge screws. Adjust door.
Retighten 4 hinge screws.
8b
Wall
2 x 4
Refrigerator
If needed, depending on cabinet and depth,
attach second 2 x 4 to first 2 x 4.
9
Plug in power cord to verify operation.
Note: Make sure power switch and showroom switch
are in the "On" Position.
between cabinets and unit. When moving unit, do not
10b
Carefully move unit until semi flush with cabinet
(depending on unit).
12
Flush water line by running two quarts of water
into a bucket. Turn water off.
57
10a
Place unit within 3" of being flush with cabinets.
Note: To avoid cabinet damage, place cardboard
crimp, kink or crush water supply line.
11
Pull supply tubing forward under unit.
Note: DO NOT use plastic water lines.
13
Connect supply tube to water valve using
a 1/2" wrench. Note: DO NOT overtighten.